Scientific Articles
2006 |
Development of porous polypropylene blends with NA11 particles and glass hollow spheres by biaxial stretching for electret applications Journal Article In: IEEE Transactions on Dielectrics and Electrical Insulation, vol. 13, no. 5, pp. 992–1000, 2006. |
Biocompatibility and Fatigue Properties of Polystyrene-Polyisobutylene-Polystyrene, an Emerging Thermoplastic Elastomeric Biomaterial Journal Article In: Biomacromolecules, vol. 7, no. 3, pp. 844–850, 2006. DOI: 10.1021/bm050971c |
Electret Properties of Biaxially Stretched Polypropylene Films Containing Various Additive Journal Article In: Journal of Physics D: Applied Physics, vol. 39, no. 3, 2006. |
Compatibilisation of PPE/SAN blends by triblock terpolymers: Correlation between block terpolymer composition, morphology and properties Journal Article In: Polymer, vol. 47, no. 8, pp. 2772–2790, 2006. |
Extrusion foamability of high-temperature polyetherimide Journal Article In: Zeitschrift Kunststofftechnik/Journal of Plastics Technology, 2006. |
Effective halogen-free flame retardants for carbon fibre-reinforced epoxy composites Journal Article In: Journal of Materials Science, vol. 41, no. 15, pp. 4981–4984, 2006. |
Solubility measurements of N2 and CO2 in polypropylene and ethene/octene copolymer Journal Article In: Journal of Applied Polymer Science, vol. 103, no. 5, pp. 2945–2953, 2006. DOI: 10.1002/app.25163 |
Effect of organoclay structure - Morphology and mechanical properties of poly(styrene-B-butadiene-B-styrene) block copolymer nanocomposites Journal Article In: KGK rubberpoint, vol. 59, pp. 388-395, 2006. |
Effective halogen-free flame retardancy for a monocomponent polyfunctional epoxy using an oligomeric organophosphorus compound Journal Article In: Journal of Materials Science, vol. 41, no. 24, pp. 8347–8351, 2006. |
Influence of the oxidation state of phosphorus on the decomposition and fire behaviour of flame-retarded epoxy resin composites Journal Article In: Polymer, vol. 47, no. 26, pp. 8495-8508, 2006. |
Modification of Polysulfones by Carboxylic Acids Journal Article In: High Performance Polymers, vol. 19, no. 1, pp. 48–61, 2006. |
Electret Properties of Biaxially Stretched Polypropylene Films Containing Various Additive Journal Article In: Journal of Physics D: Applied Physics, vol. 39, no. 3, 2006. |
Extrusion foamability of high-temperature polyetherimide Journal Article In: Zeitschrift Kunststofftechnik/Journal of Plastics Technology, 2006. |
Solubility measurements of N2 and CO2 in polypropylene and ethene/octene copolymer Journal Article In: Journal of Applied Polymer Science, vol. 103, no. 5, pp. 2945–2953, 2006. DOI: 10.1002/app.25163 |
Verfahrensentwicklung partielles Tiefziehen für Großformteile mit hohem optischem Anspruc Journal Article In: Diplomarbeit, Universität Bayreuth, Lehrstuhl für Polymere Werkstoffe, (2006)., 2006. |
Effect of organoclay structure - Morphology and mechanical properties of poly(styrene-B-butadiene-B-styrene) block copolymer nanocomposites Journal Article In: KGK rubberpoint, vol. 59, pp. 388-395, 2006. |
Novel Epoxy Resin Matrices using Halogen-free Phosphorous-containing Hardners with Tailored Chemical Structure Journal Article In: Journal of Applied Polymer Science, submitted, (2006)., 2006. |
Material characterisation of C/SiC: Comparison of computed-tomography and scanning electron microscopy Journal Article In: 2006. |
Influence of Chemical Structure and Solubility of Bisamide Additives on the Nucleation of IsotacticPolypropylene and the Improvement of its Charge Storage Properties Journal Article In: Macromolecules, no. 39, pp. 5760–5767, 2006. |
2005 |
Novel Phosphorous-Containing Aromatic Polyethers - Synthesis and Characterizatio Journal Article In: Macromolecular Chemistry and Physics, vol. 206, no. 4, pp. 423–431, 2005. |
Novel Phosphorous-Containing Aromatic Polyethers - Synthesis and Characterization Journal Article In: Macromolecular Chemistry and Physics, vol. 206, no. 4, pp. 423–431, 2005. |
Comparison of the performance of vulcanized rubbers and elastomer/TPE/iron composites for less lethal ammunition applications Journal Article In: Polymer Engineering & Science, vol. 45, no. 7, pp. 966–975, 2005. DOI: 10.1002/pen.20363 |
Charge storage behavior of isotropic and biaxially-oriented polypropylene films containing $upalpha$- and $upbeta$-nucleating agents Journal Article In: Journal of Applied Polymer Science, vol. 99, no. 3, pp. 650-658, 2005. DOI: 10.1002/app.22502 |
Carbon Nanofibers Allow Foaming of Semicrystalline Poly(ether ether ketone) Journal Article In: Advanced Materials, vol. 17, no. 23, pp. 2864-2869, 2005. |
2004 |
Blends containing core–shell impact modifiers. Part 4 – Fatigue crack growth behaviour Journal Article In: Plastics, Rubber and Composites, vol. 33, no. 6, pp. 234–241, 2004. |
Synthesis of PEEK/PSU Multiblock Copolymers Journal Article In: High Performance Polymers, vol. 16, no. 1, pp. 3–20, 2004. |
Fatigue behaviour of multiblock thermoplastic elastomers. 3. Stepwise increasing strain test of poly(aliphatic/aromatic-ester) copolymers Journal Article In: Polymer, vol. 45, no. 1, pp. 263-273, 2004. |
Rheological and Mechanical Properties of PaMSAN/PMMA blends in Miscible and Phase Separated Regimes of Various Morphologies: Part IV. Influence of the Morphology on the Mechanical Properties Journal Article In: Pure and Applied Chemistry, vol. 76, pp. 389-413, 2004. |
Tribological behaviour of carbon-nanofibre-reinforced poly(ether ether ketone) Journal Article In: Wear, vol. 257, no. 9-10, pp. 1006-1014, 2004. |
Melt processed blends of poly(styrene-co-acrylonitrile) and poly(phenylene ether) compatibilized with polystyrene-b-polybutadiene-b-poly(methyl methacrylate) triblock terpolymers Journal Article In: Polymer, vol. 45, no. 16, pp. 5653-5660, 2004. |
Nucleation of isotactic polypropylene by triphenylamine-based trisamide derivatives and their influence on charge-storage properties Journal Article In: Polymer, vol. 45, no. 19, pp. 6655-6663, 2004. |
Environmental Stress Cracking of Polymers Monitored by Fatigue Crack Growth Experiment Journal Article In: Macromolecular Symposia, vol. 214, no. 1, pp. 31–46, 2004. |
Messung der Löslichkeit und des Stofftransports von CO2 in polymeren Werkstoffen mit Hilfe einer Magnetschwebewaage Journal Article In: Chemie Ingenieur Technik, vol. 76, no. 9, pp. 1352–1352, 2004. |
Blends containing core–shell impact modifiers. Part 4 – Fatigue crack growth behaviour Journal Article In: Plastics, Rubber and Composites, vol. 33, no. 6, pp. 234–241, 2004. |
Phase morphology, crystallisation behaviour and mechanical properties of isotactic polypropylene/high density polyethylene blends Journal Article In: European Polymer Journal, vol. 40, no. 9, pp. 2105-2115, 2004. |
Synthesis of PEEK/PSU Multiblock Copolymer Journal Article In: High Performance Polymers, vol. 16, pp. 3-20, 2004. |
Rheological and Mechanical Properties of PaMSAN/PMMA blends in Miscible and Phase Separated Regimes of Various Morphologies: Part IV. Influence of the Morphology on the Mechanical Propertie Journal Article In: Pure and Applied Chemistry, vol. 76, pp. 389-413, 2004. |
Thermoplastische Leiterplatten als Beitrag zur Kreislaufwirtschaf Journal Article In: GMM/DVS-Tagung, 04.02. – 05.02.2004, Fellbach, (2004)., 2004. |
Metallisieren von Polyetherimi Journal Article In: Große Studienarbeit, Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, (2004)., 2004. |
Verfahrensarten der Herstellung mikrozellulärer Spritzgussteil Journal Article In: Kleine Studienarbeit, Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, (2004)., 2004. |
Allgemeine Normen zur Prüfung von Schaumstoffe Journal Article In: Kleine Studienarbeit, Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, (2004)., 2004. |
Herstellung von Multiwall-Carbon-Nanotubes/Nanofasern und die Eigenschaftssteigerung in Nanotube/Nanofaser-Polymer Composite Journal Article In: Kleine Studienarbeit, Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, (2004)., 2004. |
Charakterisierung der Struktur-Eigenschaftsbeziehung von langfaserverstärktem Polypropylen bei der Verarbeitung im Spritzgussintegralschaumverfahre Journal Article In: Diplomarbeit, Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, (2004)., 2004. |
Physik der Schaumbildung Journal Article In: Kleine Studienarbeit, Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, (2004)., 2004. |
Herstellverfahren von Polymerpulver Journal Article In: Kleine Studienarbeit, Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, (2004)., 2004. |
Messungen der Gasemission an Schaumspritzgussteile Journal Article In: Große Studienarbeit, Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, (2004)., 2004. |
Poröse Polymere - Materialien zur Ladungsspeicherung Journal Article In: Kleine Studienarbeit, Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, (2004)., 2004. |
Alternative Härtungsmethoden für duroplastische Materialie Journal Article In: Kleine Studienarbeit, Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, (2004)., 2004. |
Variationen der Liquid-Composite-Moulding Verfahre Journal Article In: Kleine Studienarbeit, Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, (2004)., 2004. |
Klebeverbindungen im Flugzeugbau Journal Article In: Kleine Studienarbeit, Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, (2004)., 2004. |