Scientific Articles

727 entries « ‹ 11 of 15 › »

2003

Puskas, J E; Antony, P; Fray, El M; Altstädt, V

The effect of hard and soft segment composition and molecular architecture on the morphology and mechanical properties of polystyrene–polyisobutylene thermoplastic elastomeric block copolymers Journal Article

In: European Polymer Journal, vol. 39, no. 10, pp. 2041–2049, 2003.

DOI: 10.1016/s0014-3057(03)00130-7

Antony, P.; Paulo, C.; Puskas, J. E.; Ott, H.; Altstädt, V.; Kovar, M.; Norton, P. R.

Effect of Hard and Soft Segment Composition on the Morphology and Mechanical Properties of Poystyrene-Polyisobutylene Thermoplastic Elastomeric Block Copolymer Journal Article

In: European Polymer Journal, vol. 39, no. 10, pp. 2041–2049, 2003.

DOI: 10.1016/s0014-3057(03)00130-7

Sandler, J.; Windle, A. H.; Werner, P.; Altstädt, V.; Es, M. V.; Shaffer, M. S. P.

Carbon-nanofibre-reinforced poly(ether ether ketone) fibres Journal Article

In: Journal of Materials Science, vol. 38, no. 10, pp. 2135–2141, 2003, ISSN: 1573-4803.

DOI: 10.1023/A:1023715811817

https://doi.org/10.1023/A:1023715811817

Fray, El M; Altstädt, V

Fatigue behaviour of multiblock thermoplastic elastomers. 1. Stepwise increasing load testing of poly(aliphatic/aromatic-ester) copolymers Journal Article

In: Polymer, vol. 44, no. 16, pp. 4635-4642, 2003.

DOI: 10.1016/S0032-3861(03)00417-8

Fray, El M; Altstädt, V

Fatigue behaviour of multiblock thermoplastic elastomers. 2. Dynamic creep of poly(aliphatic/aromatic-ester) copolymers Journal Article

In: Polymer, vol. 44, no. 16, pp. 4643–4650, 2003.

DOI: 10.1016/S0032-3861(03)00418-X

Sandler, J; Windle, A H; Werner, P; Altstädt, V; Es, M V; Shaffer, M S P

Carbon-nanofibre-reinforced poly(ether ether ketone) fibres Journal Article

In: Journal of Materials Science, vol. 38, no. 10, pp. 2135–2141, 2003, ISSN: 1573-4803.

DOI: 10.1023/A:1023715811817

https://doi.org/10.1023/A:1023715811817

Uribe-Arocha, Paola; Mehler, Christof; Puskas, Judit E; Altstädt, Volker

Effect of sample thickness on the mechanical properties of injection-molded polyamide-6 and polyamide-6 clay nanocomposites Journal Article

In: Polymer, vol. 44, no. 8, pp. 2441-2446, 2003.

DOI: 10.1016/s0032-3861(03)00115-0

Fray, Miroslawa El; Altstaedt, Volker

Synthesis and characterization of multiblock copolyesters containing poly(dimethylsiloxane) in the soft segments Journal Article

In: Macromolecular Symposia, vol. 199, no. 1, pp. 125–134, 2003.

DOI: 10.1002/masy.200350911

Puskas, J E; Antony, P; Fray, El M; Altstädt, V

In: European Polymer Journal, vol. 39, no. 10, pp. 2041–2049, 2003.

DOI: 10.1016/S0014-3057(03)00130-7

Aprem, A S; Joseph, K; Mathew, T; Altstädt, V; Thomas, S

Studies on Accelerated Sulphur Vulcanization of Natural Rubber Using 1-Phenyl-2,4-Dithiobiuret/Tertiary Butyl Benzothiazole Sulphenamid Journal Article

In: European Polymer Journal, vol. 39, pp. 1451-1460, 2003.

Aprem, A. S.; Joseph, K.; Mathew, T.; Altstädt, V.; Thomas, S.

Studies on Accelerated Sulphur Vulcanization of Natural Rubber Using 1-Phenyl-2,4-Dithiobiuret/Tertiary Butyl Benzothiazole Sulphenamid Journal Article

In: European Polymer Journal, vol. 39, pp. 1451-1460, 2003.

Ackermann, J.; Bosch, E.; Harsch, M.; Linse, F.

Hochtemperaturthermoplastschäume als mögliche Kernwerkstoffe in Sachwichkonstruktionen Journal Article

In: Große Studienarbeit, Universtität Bayreuth, Lehrstuhl Polymere Werkstoffe, (2003)., 2003.

Heise, S.

Zähigkeitsoptimierung von PEEK mit Hilfe der Blend- und Compoundiertechni Journal Article

In: Große Studienarbeit, Arbeitsbereich Kunststoffe und Verbundwerkstoffe, (2003)., 2003.

Alber, B.

Alternative thermoplastisch verarbeitbare und PVC-freie Werkstoffe in der Medizin für das Anwendungsgebiet Schlauchsysteme in der Infusion und Dialys Journal Article

In: Diplomarbeit, Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, (2003)., 2003.

Endres, G.; Fischer, F.; Oetinger, S.; Ruckdäschel, H.; Wolf, H.

Entwicklung einer Messapparatur zur Bestimmung der Permeation an offenzelligen, deformierbaren Schäume Journal Article

In: Große Studienarbeit, Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, (2003)., 2003.

Fischer, F.

Prüfmethoden für mikrozelluläre Polyurethanschäum Journal Article

In: Kleine Studienarbeit, Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, (2003)., 2003.

Altstaedt, Volker; Werner, Philipp; Sandler, Jan

Rheological, mechanical and tribological properties of carbon-nanofibre reinforced poly (ether ether ketone) composites Journal Article

In: Polímeros, vol. 13, no. 4, pp. 218–222, 2003.

DOI: 10.1590/S0104-14282003000400005

Beyer, H.; Hübner, M.; Lochmüller, M.; Schirmer, O.; Weiß, S.; Spörrer, A.

Herstellung von PEEK-Schäumen durch Konstruktion und Fertigung einer neuartigen Pressfor Journal Article

In: Große Studienarbeit, Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, (2003)., 2003.

2002

Altstädt, V.

Neue Materialien Bayreuth eröffnet Journal Article

In: Spektrum, (2002)., 2002.

Ott, H; Abetz, V; Altstädt, V; Thomann, Y; Pfau, A

Comparative study of a block copolymer morphology by transmission electron microscopy and scanning force microscopy Journal Article

In: Journal of Microscopy, vol. 205, no. 1, pp. 106–108, 2002.

DOI: 10.1046/j.0022-2720.2001.00975.x

Fray, Miroslawa El; Altstädt, Volker

Morphology of multiblock copolymers as studied by micro-thermal analysis Journal Article

In: Designed Monomers and Polymers, vol. 5, no. 2-3, pp. 353-361., 2002.

DOI: 10.1163/156855502760158033

Wöllecke, Frank; Altstädt, Volker; Sandler, Jan; Rakutt, Dietmar

The Influence of Melt Elongational Properties on the Morphology of PES Cellular Materials Journal Article

In: Cellular Polymers, vol. 21, no. 6, pp. 445–454, 2002.

DOI: 10.1177/026248930202100603

Cadek, M; Coleman, J N; Barron, V; Hedicke, K; Blau, W J

Morphological and mechanical properties of carbon-nanotube-reinforced semicrystalline and amorphous polymer composites Journal Article

In: Applied Physics Letters, vol. 81, no. 27, pp. 5123–5125, 2002.

DOI: 10.1063/1.1533118

Sandler, Jan; Werner, Philipp; Shaffer, Milo S P; Demchuk, Vitaly; Altstädt, Volker; Windle, Alan H

Carbon-nanofibre-reinforced poly(ether ether ketone) composites Journal Article

In: Composites Part A: Applied Science and Manufacturing, vol. 33, no. 8, pp. 1033-1039., 2002.

DOI: 10.1016/s1359-835x(02)00084-2

Hoffmann, T.; Pospiech, D.; Häußler, L.; Pötschke, P.; Voigt, D.; Werner, P.; Altstädt, V.

Compatibilization of high performance polymer blends using block copolymers Journal Article

In: Materials Week, 2002.

Hoffmann, T.; Pospiech, D.; Häußler, L.; Komber, H.; Voigt, D.; Jenichen, D.; Friedel, P.; Werner, P.; Altstädt, V.

Kompatibilisierung von Hochtemperaturthermoplastblends durch Blockcopolymer Journal Article

In: GDCh-Fachgruppentagung Chemie, Darmstadt, 2002.

Brendel, A.; Knoll, M.; Müller, M.; Richter, K.

Ersatz von Getriebeteilen durch einen Hochtemperaturthermoplasten auf PEEK-Basi Journal Article

In: Große Studienarbeit, Universtität Bayreuth, Lehrstuhl Polymere Werkstoffe, (2002)., 2002.

Eckhardt, C.; Greßmann, T.; Hagen, G.; Hüller, M.; Kohles, C.; Musiol, J.

Evaluierung der Potenziale neuer Materialien aus nachwachsenden Rohstoffen in ausgewählten industriellen Anwendunge Journal Article

In: Große Studienarbeit, Universtität Bayreuth, Lehrstuhl Polymere Werkstoffe, (2002)., 2002.

Alber, B.; Gietl, T.; Göldel, A.; Kokott, S.; Rödel, A.

Ersatz eines Kupfersammelsystems an einem Sonnenkollektor durch einen Hochtemperaturthermoplaste Journal Article

In: Große Studienarbeit, Universtität Bayreuth, Lehrstuhl Polymere Werkstoffe, (2002)., 2002.

Puskas, Judit E; Paulo, Christophe; Altstädt, Volker

Mechanical and Viscoelastic Characterization of Hyperbranched Polyisobutylenes Journal Article

In: Rubber Chemistry and Technology, vol. 75, no. 5, pp. 853–864, 2002.

DOI: 10.5254/1.3547688

2001

Sandler, Jan; Shaffer, MiloS. P.; Lam, Yeng-Ming; Windle, Alan H.; Werner, Philipp; Altstädt, Volker; Nastalczyk, Jacek; Broza, Georg; Schulte, Karl; Keun, Christian-André

Carbon-Nanofibre-Filled Thermoplastic Composites Journal Article

In: MRS Proceedings, 2001.

DOI: 10.1557/PROC-706-Z4.7.1

Kricheldorf, Hans R; Wollheim, Thomas; Koning, Cor E; Werumeus-Buning, Gerard H; Altstädt, Volker

Thermoplastic elastomers 1. Poly(ether-ester-imide)s based on 1,4-diaminobutane, trimellitic anhydride, 1,4-dihydroxybutane and poly(tetramethylene oxide) diols Journal Article

In: Polymer, vol. 42, no. 16, pp. 6699–6708, 2001.

DOI: 10.1016/s0032-3861(01)00151-3

Puskas, Judit; Antony, Prince; Kwon, Yongmoon; Paulo, Christophe; Kovar, Milan; Norton, Peter R.; Kaszas, Gabor; Altstädt, Volker

Macromolecular Engineering via Carbocationic Polymerization: Branched Structures, Block Copolymers and Nanostructures Journal Article

In: Macromolecular Materials and Engineering, vol. 286, pp. 565 - 582, 2001.

DOI: 10.1002/1439-2054(20011001)286:10<565::AID-MAME565>3.0.CO;2-E

Ott, Harald; Abetz, Volker; Altstädt, Volker

Morphological Studies of Poly(styrene)-block-poly(ethylene-co-butylene)-block-poly(methyl methacrylate) in the Composition Region of the textquotedblleftKnitting Patterntextquotedblright Morphologytextsection Journal Article

In: Macromolecules, vol. 34, no. 7, pp. 2121–2128, 2001.

DOI: 10.1021/ma0017079

Wollheim, Thomas; Kricheldorf, Hans R; Altstädt, Volker; Koning, Cor E; Buning, Gerard Werumeus H

Thermoplastic Elastomers: 3. Poly(Ether-Ester-Imide)s Based on 1,6-Diaminohexane, Trimellitic Anhydride, 1,4-Dihydroxybutane and Poly(Tetramethylene Oxide) Journal Article

In: High Performance Polymers, vol. 13, no. 3, pp. 119–132, 2001.

DOI: 10.1088/0954-0083/13/3/305

Kricheldorf, Hans R; Wollheim, Thomas; Altstadt, Volker; Koning, Cor E; Buning, Gerard Werumeus M

Thermoplastic Elastomers 2. Poly(ether-esterimide)s Based on 1,4-Diaminobutane, Trimellitic Anhydride, 1,4-Dihydroxybutane and Poly(ethylene oxide) Journal Article

In: Journal of Macromolecular Science, vol. 38, no. 5-6, pp. 451-466., 2001.

DOI: 10.1081/ma-100103360

Kricheldorf, H R; Wollheima, T; Soliman, M; Buning, Werumeus G H; Koning, C E; Altstadt, V

Thermoplastic Elastomers 4. Poly(ether-ester-imide)s Derived from Trimellitic Anhydride, 1,6 Diaminohexane,1,4-Dihydroxybutane and Poly(ethylene oxide) Journal Article

In: International Journal of Polymeric Materials, vol. 50, no. 3-4, pp. 359-372., 2001.

DOI: 10.1080/00914030108035113

Dijkstra, Dirk; Altstädt, Volker; Mitra, M

Impact Fatigue Behaviour of Rubber-Modified Glass Fibre Reinforced Polyamide 6 Journal Article

In: Macromolecular Materials and Engineering, vol. 286, pp. 669, 2001.

DOI: 10.1002/1439-2054(20011101)286:113.0.CO;2-R

Altstädt, V

Forschung Verbundwerkstoffe am neuen Lehrstuhl für Polymere Werskstoffe Journal Article

In: 7. Nationales Symposium SAMPE Deutschland e.V., 2001.

Puskas, Judit E.; Paulo, Volker Altstädt Christophe

Structure-Property Relationships in Hyperbranched Polyisobutylenes Journal Article

In: Rubber Division Conference Cleveland 2001, 2001.

Puskas, Judit; Antony, Prince; Kwon, Yongmoon; Paulo, Christophe; Kovar, Milan; Norton, Peter R.; Kaszas, Gabor; Altstädt, Volker

Macromolecular Engineering via Carbocationic Polymerization: Branched Structures, Block Copolymers and Nanostructures Journal Article

In: Macromolecular Materials and Engineering, vol. 286, pp. 565 - 582, 2001.

DOI: 10.1002/1439-2054(20011001)286:10<565::AID-MAME565>3.0.CO;2-E

Lengsfeld, H.; Altstädt, V.; Sprenger, S.; Utz, R.

Flame-retardant Curing Journal Article

In: Kunststoffe, (2001), vol. 91, pp. 37-39., 2001.

Lengsfeld, H.; Altstädt, V.; Sprenger, S.; Utz, R.

Flammgeschützt Härte Journal Article

In: Kunststoffe, vol. 91, pp. 94-97., 2001.

Altstädt, V.

Über Impact und Ermüdung von Kunststoffe Journal Article

In: Problemseminar: Deformation and Bruchverhalten von Kunststoffen, Merseburg, (2001)., 2001.

Langenfelder, D.; Bergmann, J. P.; Müller, K.; Bergmann, H. W.

A Method for Determining the Weld Pool after Laser Beam Weldin Journal Article

In: Zeitschrift für Metallkunde, (2001),, vol. 92, 2001.

Dijkstra, Dirk; Altstädt, Volker; M, Mitra

Impact Fatigue Behaviour of Rubber-Modified Glass Fibre Reinforced Polyamide 6 Journal Article

In: Macromolecular Materials and Engineering, vol. 286, pp. 669, 2001.

DOI: 10.1002/1439-2054(20011101)286:113.0.CO;2-R

2000

Lach, R; Grellmann, W; Weidisch, R; Altstädt, V; Kirschnick, T; Ott, H; Stadler, R; Mehler, C

Poly(styrene-block-butadiene-block-styrene-block-butadiene) and Poly(styrene-block-butadiene-block-methyl methacrylate) Copolymers as Compatibilizers in PPO-SAN Blends. I. Morphology and Fracture Behaviour Journal Article

In: Journal of Applied Polymer Science, pp. 2037-2045., 2000.

DOI: 10.1002/1097-4628(20001209)78:11<2037::AID-APP250>3.0.CO;2-%23

Sandler, Jan; Wöllecke, Frank; Altstädt, Volker; Wettstein, E; Rakutt, Dietmar

Principal correlation of PVC melt elongational properties with foam cell morphology Journal Article

In: Cellular Polymers, vol. 19, pp. 371-388, 2000.

Lach, R.; Grellmann, W.; Weidisch, R.; Altstädt, V.; Kirschnick, T.; Ott, H.; Stadler, R.; Mehler, C.

In: Journal of Applied Polymer Science 78(11), (2000), pp. 2037-2045., 2000.

DOI: 10.1002/1097-4628(20001209)78:11<2037::AID-APP250>3.0.CO;2-%23

Altstädt, V.

Polymerphysik für die Praxis der Aufbereitung und Verarbeitung Journal Article

In: Seminar - VDI-K, Stuttgart., vol. 2000, 2000.

727 entries « ‹ 11 of 15 › »