Scientific Articles
2008 |
Understanding Melt Rheology and Foamability of Polypropylene-Based TPO Blend Journal Article In: Journal of Cellular Plastics, 2008. |
Pyrolysis and fire behaviour of epoxy systems containing a novel 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide-(DOPO)-based diamino hardener Journal Article In: European Polymer Journal, vol. 44, no. 3, pp. 704-715, 2008. |
Silver Olefin Complexes: Highly Efficient Initiators for the Electron Beam Curing of Epoxy Resin Journal Article In: Macromolecules, pp. 3779-3781, 2008. |
New yarn materials for high-performance fibre-reinforced composites made of stitched preform Journal Article In: Zeitschrift Kunststofftechnik / Journal of Plastics Technology, vol. 5, 2008. |
Controlling the phase morphology of immiscible poly(2,6- dimethyl-1,4-phenylene ether)/poly(styrene-co-acrylonitrile) blends via addition of polystyrene Journal Article In: e-Polymers, vol. 8, no. 1, 2008. |
Positron Annihilation Lifetime Measurements of Mechanically Fatigued Polystyrene Sample Journal Article In: Journal of Polymer Science Part B: Polymer Physics, vol. 46, no. 18, pp. 1991–1995, 2008. DOI: 10.1002/polb.21536 |
New polymers for tailor-made nanocomposites Journal Article In: Journal of Nanostructured Polymers and Nanocomposites, vol. 4, 2008. |
Understanding Melt Rheology and Foamability of Polypropylene-Based TPO Blend Journal Article In: Journal of Cellular Plastics, Vol 44 (4), (2008)., 2008. |
Material Characterisation of C/SiC: Comparison of Computed-Tomography and Scanning Electron Microscop Journal Article In: Online-Journal NDT NET, submitted, (2008)., 2008. |
Silver Olefin Complexes: Highly Efficient Initiators for the Electron Beam Curing of Epoxy Resin Journal Article In: Macromolecules, 41 (2008)., pp. 3779-3781, 2008. |
New yarn materials for high-performance fibre-reinforced composites made of stitched preform Journal Article In: Zeitschrift Kunststofftechnik / Journal of Plastics Technology 4, (2008)., vol. 5, 2008. |
A Novel DOPO-Based Diamine as Hardener and Flame Retardant for Epoxy Resin Systems Journal Article In: Macromolecular Materials and Engineering, vol. 293, no. 6, pp. 503–514, 2008. |
Correlation of the melt rheological properties with the foaming behavior of immiscible blends of poly(2,6-dimethyl-1,4-phenylene ether) and poly(styrene-co-acrylonitrile) Journal Article In: Polymer Engineering & Science, vol. 48, no. 11, pp. 2111–2125, 2008. DOI: 10.1002/pen.21100 |
Evaluation of preforms stitched with a low melting-temperature thermoplastic yarn in carbon fibre-reinforced composites Journal Article In: Composites Part A: Applied Science and Manufacturing, vol. 39, no. 5, pp. 705–711, 2008. |
Mechanical performance of carbon fibre-reinforced composites based on preforms stitched with innovative low-melting temperature and matrix soluble thermoplastic yarns Journal Article In: Composites Part A: Applied Science and Manufacturing, vol. 39, no. 9, pp. 1572–1581, 2008. |
Electrospun Polymeric Fine Fibres: Morphology and Properties Journal Article In: G.I.T. Imaging & Microscopy, no. 2, pp. 29-31, 2008. |
The Challenge of Foam Injection-Moulding – Possibilities to Improve Surface Appearance, Foam Morphology and Mechanical Properties Journal Article In: Cellular Polymers, vol. 27, no. 2, pp. 101–121, 2008. |
Dispersion of carbon nanotubes in poly(ether ether ketone) and its effects on rheological and electrical properties Journal Article In: Zeitschrift Kunststofftechnik / Journal of Plastics Technology, 2008. |
2007 |
Characterization of temperature-dependent moisture diffusivity in PMR-15 resin Journal Article In: Journal of Applied Polymer Science, vol. 106, no. 2, pp. 1281–1290, 2007. DOI: 10.1002/app.26538 |
Carbon nanofibre-reinforced ultrahigh molecular weight polyethylene for tribological applications Journal Article In: Journal of Applied Polymer Science, vol. 104, no. 6, pp. 4173-4181, 2007. DOI: 10.1002/app.26058 |
Additives to improve the electret properties of isotactic polypropylene Journal Article In: Polymer, vol. 48, no. 6, pp. 1612-1619, 2007. |
Improvement of the Mechanical Properties and Creep Resistance of SBS Block Copolymers by Nanoclay Fillers Journal Article In: Macromolecular Materials and Engineering, vol. 292, no. 1, pp. 23–32, 2007. |
Mechanical performance of carbon fibre-reinforced composites based on stitched preforms Journal Article In: Composites Part A: Applied Science and Manufacturing, vol. 38, no. 7, pp. 1655-1663, 2007. |
Novel phosphorus-modified polysulfone as a combined flame retardant and toughness modifier for epoxy resins Journal Article In: Polymer, vol. 48, no. 3, pp. 778–790, 2007. |
Pyrolysis of epoxy resins and fire behavior of epoxy resin composites flame-retarded with 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide additives Journal Article In: Journal of Applied Polymer Science, vol. 104, no. 4, pp. 2260-2269, 2007. DOI: 10.1002/app.25660 |
Blends of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) with polystyrene-based thermoplastic rubbers: A comparative study Journal Article In: Polymer, vol. 48, no. 2, pp. 590, 2007. |
Tailored polymer electrets based on poly(2,6-dimethyl-1,4-phenylene ether) and its blends with polystyrene Journal Article In: European Polymer Journal, vol. 43, no. 4, pp. 1195–1201, 2007. |
Electret Properties of Polyetherimides: Influence of Water Content and Comparison with Other High-Temperature Polymer Films Journal Article In: Macromolecular Materials and Engineering, vol. 292, no. 5, pp. 582–587, 2007. |
Toughening of immiscible PPE/SAN blends by triblock terpolymers Journal Article In: Polymer, vol. 48, no. 9, pp. 2700-2719, 2007. |
Novel phosphorus-containing hardeners with tailored chemical structures for epoxy resins: Synthesis and cured resin properties Journal Article In: Journal of Applied Polymer Science, vol. 105, no. 5, pp. 2744–2759, 2007. DOI: 10.1002/app.26537 |
Fatigue crack propagation behaviour of polyamide- 6 nanocomposites based on layered silicates Journal Article In: Zeitschrift Kunststofftechnik/Journal of Plastics Technology, 2007. |
Properties of Segmented Block Copolymers in PEEK/PSU Blends Journal Article In: High Performance Polymers, vol. 20, no. 6, pp. 601–614, 2007. |
A Novel and Effective Synthetic Approach to 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) Derivatives Journal Article In: Phosphorus, Sulfur, and Silicon and the Related Elements, vol. 182, no. 9, pp. 2131–2148, 2007. |
Controlling Morphology of Injection Molded Structural Foams by Mold Design and Processing Parameters Journal Article In: Journal of Cellular Plastics, vol. 43, no. 4-5, pp. 313–330, 2007. |
Synthesis and Structure-Property Relationships of Fluorinated Poly(ether imide)s as Electret Materials Journal Article In: Macromolecular Chemistry and Physics, vol. 208, no. 14, pp. 1522–1529, 2007. |
Pyrolysis of epoxy resins and fire behavior of epoxy resin composites flame-retarded with 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide additives Journal Article In: Journal of Applied Polymer Science, vol. 104, no. 4, pp. 2260-2269, 2007. DOI: 10.1002/app.25660 |
Fatigue crack propagation behaviour of polyamide- 6 nanocomposites based on layered silicates Journal Article In: Zeitschrift Kunststofftechnik/Journal of Plastics Technology, 2007. |
Microwave Curing of Phenolic Resin Journal Article In: Diplomarbeit, Universität Bayreuth, Lehrstuhl für Polymere Werkstoffe, (2007)., 2007. |
Influence of Nanoscale Morphology on the Micro- and Macromechanical Behaviour of Polymers and Polymer Nanocomposites Journal Article In: Solid State Phenomena, vol. 121-123, pp. 1391-1394, 2007. |
Blends of Poly(ether imide) and Styrene Sulfonic Acid Based Polymer: Thermal, Mechanical and Ionic Conduction Behavior Journal Article In: International Journal of Polymeric Materials, vol. 56, no. 5, pp. 521–534, 2007. |
Foaming of Polymer Blends – Chance and Challenge Journal Article In: CELLULAR POLYMERS, vol. 26, no. 6, 2007. |
Electrospun Nanofibers of High Performance Electret Polymers Journal Article In: Microscopy and Microanalysis, Material Science - Polymers and Composites Applications, no. 13, pp. 444–445, 2007. |
2006 |
Development of porous polypropylene blends with NA11 particles and glass hollow spheres by biaxial stretching for electret applications Journal Article In: IEEE Transactions on Dielectrics and Electrical Insulation, vol. 13, no. 5, pp. 992–1000, 2006. |
Morphology and Electret Behaviour of Microcellular High Glass Temperature Films Journal Article In: Journal of Applied Physics A - Materials Science and Processing, no. 85, pp. 87–93, 2006. |
Novel Phosphorus-Containing Poly(ether sulfone)s and Their Blends with an Epoxy Resin: ThermalDecomposition and Fire Retardancy Journal Article In: Macromolecular Chemistry and Physics, no. 207, pp. 1501–1514, 2006. |
Foaming of miscible and immiscible polymer blends Journal Article In: vol. 977, pp. 46-52, 2006. |
Material Characterisation of C/SiC: Comparison of Computed-Tomography and Scanning Electron Microscop Journal Article In: Online-Journal NDT NET, 2006. |
Effect of DOP-based compounds on fire retardancy, thermal stability, and mechanical properties of DGEBA cured with 4,4$prime$-DDS Journal Article In: Journal of Materials Science, vol. 41, no. 2, pp. 341–353, 2006. |
The efficiency of various toughening agents in novel phenolic type thermoset resin systems Journal Article In: Journal of Materials Science, vol. 41, no. 24, pp. 8226-8243, 2006. |
Crystallisation behaviour of Polyamide-6 and Polyamide-66 nanocomposites Journal Article In: Composites Science and Technology, vol. 66, no. 3-4, pp. 571–575, 2006. |