Scientific Articles
0000 |
On the importance of specific interface area in clay nanocomposites of~PMMA filled with synthetic nano-mica Journal Article In: Polymer, vol. 55, no. 16, pp. 3770–3781, 0000. |
Rheological and crystallisation behaviour of high melt strength polypropylene under gas-loading Journal Article In: Polymer, vol. 55, no. 6, pp. 1537–1545, 0000. |
The effect of carbon black reinforcement on the dynamic fatigue and creep of polyisobutylene-based biomaterials Journal Article In: Journal of the Mechanical Behavior of Biomedical Materials, vol. 39, pp. 355–365, 0000. |
The Impact of Janus Nanoparticles on the Compatibilization of Immiscible Polymer Blends under Technologically Relevant Conditions Journal Article In: ACS Nano, vol. 8, no. 10, pp. 10048–10056, 0000. DOI: 10.1021/nn502662p |
Towards completely miscible PMMA nanocomposites reinforced by shear-stiff, nano-mica Journal Article In: Journal of Colloid and Interface Science, vol. 425, pp. 143–151, 0000. |
Großserientaugliche thermoplastische Sandwich-Strukturen Journal Article In: Lightweight Design, vol. 7, no. 4, pp. 56–62, 0000. |
An investigation on the flexural properties of balsa and polymer foam core sandwich structures: Influence of core type and contour finishing options Journal Article In: Journal of Sandwich Structures & Materials, vol. 15, no. 5, pp. 487–508, 0000. |
Efeito da hibridização de montmorilonita e celulose II sobre as propriedades mecânicas de nanocompósitos de borracha natural Journal Article In: Polímeros, vol. 23, no. 1, pp. 123–127, 0000. |
Influence of the composite surface structure on the peel strength of metallized carbon fibre-reinforced epoxy Journal Article In: Surface and Coatings Technology, vol. 232, pp. 319–325, 0000. |
Modeling and estimation of parameters for the curing of an epoxy/amine system Journal Article In: Polymer Testing, vol. 32, no. 4, pp. 647–654, 0000. |
Poly(vinylidene fluoride)/polyaniline/carbon nanotubes nanocomposites: Influence of preparation method and oscillatory shear on morphology and electrical conductivity Journal Article In: Polymer Testing, vol. 32, no. 8, pp. 1511–1521, 0000. |
Completely Miscible Polyethylene Nanocomposites Journal Article In: Journal of the American Chemical Society, vol. 134, no. 44, pp. 18157–18160, 0000. DOI: 10.1021/ja307297c |
Dielectric properties of highly filled thermoplastics for printed circuit boards Journal Article In: Journal of Applied Polymer Science, vol. 128, no. 6, pp. 3758–3770, 0000. DOI: 10.1002/app.38602 |
Impact of large aspect ratio, shear-stiff, mica-like clay on mechanical behaviour of PMMA/clay nanocomposites Journal Article In: Polymer, vol. 53, no. 15, pp. 3230–3237, 0000. |
Influence of polymeric flame retardants based on phosphorus-containing polyesters on morphology and material characteristics of poly(butylene terephthalate) Journal Article In: Journal of Applied Polymer Science, vol. 128, no. 5, pp. 3315–3324, 0000. DOI: 10.1002/app.38520 |
Phosphorus Polyester - an Alternative to Low-Molecular-Weight Flame Retardants in Poly(Butylene Terephthalate)? Journal Article In: Macromolecular Chemistry and Physics, vol. 213, no. 22, pp. 2386–2397, 0000. |
Synthesis of new dibenzo[c.e][1,2]oxaphosphorine 2-oxide containing diols based on diethanolamine Journal Article In: Heteroatom Chemistry, vol. 23, no. 2, pp. 146–153, 0000. DOI: 10.1002/hc.20763 |
The miscibility of poly(butylene terephthalate) (PBT) with phosphorus polyester flame retardants Journal Article In: High Performance Polymers, vol. 24, no. 1, pp. 64–73, 0000. |
Viscoelastic properties of solutions of polystyrene melts and carbon dioxide: Analysis of a transient shear rheology approach Journal Article In: Journal of Rheology, vol. 56, no. 4, pp. 743–766, 0000. DOI: 10.1122/1.4708601 |
Großserientauglicher Hochleistungsleichtbau mit UD-Tapes Journal Article In: Lightweight Design, vol. 5, no. 2, pp. 18–25, 0000. |
Influence of Processing Parameters on the Fiber Length and Impact Properties of Injection Molded Long Glass Fiber Reinforced Polypropylene Journal Article In: International Polymer Processing, vol. 26, no. 3, pp. 292–303, 0000. DOI: 10.3139/217.2442 |
Influence of supramolecular additives on foam morphology of injection-molded i-PP Journal Article In: Journal of Cellular Plastics, vol. 47, no. 6, pp. 519–534, 0000. |
Novel DOPO-based flame retardants in high-performance carbon fibre epoxy composites for aviation Journal Article In: European Polymer Journal, vol. 47, no. 5, pp. 1081–1089, 0000. |
On the determination of elastic properties of composites of polycarbonate and multi-wall carbon nanotubes in the melt Journal Article In: Rheologica Acta, vol. 50, no. 5-6, pp. 503–518, 0000. |
Toughened high performance epoxy resin system for aerospace applications Journal Article In: Science and Engineering of Composite Materials, vol. 18, no. 4, 0000. |
Composites of polyamide 6 and silicate nanotubes of the mineral halloysite: Influence of molecular weight on thermal, mechanical and rheological properties Journal Article In: Polymer, vol. 51, no. 12, pp. 2690–2699, 0000. |
Fabrication of Artificial Petal Sculptures by Replication of Sub-micron Surface Wrinkles Journal Article In: Macromolecular Chemistry and Physics, vol. 211, no. 2, pp. 259–264, 0000. |