Scientific Articles
2013 |
Properties of Recycled High Density Polyethylene and Coffee Dregs Composites Journal Article In: Polímeros, vol. 23, no. 6, pp. 733–737, 2013. |
Functionalized Graphene and Carbon Materials as Components of Styrene-Butadiene Rubber Nanocomposites Prepared by Aqueous Dispersion Blending Journal Article In: Macromolecular Materials and Engineering, vol. 299, no. 3, pp. 319–329, 2013. |
An investigation on the flexural properties of balsa and polymer foam core sandwich structures: Influence of core type and contour finishing options Journal Article In: Journal of Sandwich Structures & Materials, vol. 15, no. 5, pp. 487–508, 2013. |
Influence of the composite surface structure on the peel strength of metallized carbon fibre-reinforced epoxy Journal Article In: Surface and Coatings Technology, vol. 232, pp. 319–325, 2013. |
Modeling and estimation of parameters for the curing of an epoxy/amine system Journal Article In: Polymer Testing, vol. 32, no. 4, pp. 647–654, 2013. |
Poly(vinylidene fluoride)/polyaniline/carbon nanotubes nanocomposites: Influence of preparation method and oscillatory shear on morphology and electrical conductivity Journal Article In: Polymer Testing, vol. 32, no. 8, pp. 1511–1521, 2013. |
Electrical Conductivity of Poly(vinylidene fluoride)/Polyaniline Blends under Oscillatory and Steady Shear Condition Journal Article In: Polymer Testing, vol. 32, no. 5, pp. 862-869, 2013. |
Fire behaviour and mechanical properties of an epoxy hot-melt resin for aircraft interior Journal Article In: Composite Interfaces, vol. 20, no. 6, pp. 443-455, 2013. |
Properties of Recycled High Density Polyethylene and Coffee Dregs Composites Journal Article In: Polímeros, vol. 23, no. 6, pp. 733–737, 2013. |
Effect of Montmorillonite and cellulose II hybridization on mechanical properties of natural rubber nanocomposites Journal Article In: Polimeros, no. 23, pp. 123–127, 2013. |
2012 |
Barrier Properties of Polyamide 12 Films Nucleated with Tal Journal Article In: Journal of Plastics Technology, vol. 8, no. 4, pp. 331-350, 2012. |
Leichter in der Luft, im Wind und auf der Straße Journal Article In: Kunststoffe, no. 11, pp. 72-77., 2012. |
Overmoulding of Plane Structural Foamed Parts with a Second Thermoplastic Component Journal Article In: Cellular Polymers, vol. 31, no. 4, pp. 189-206, 2012. |
Completely Miscible Polyethylene Nanocomposites Journal Article In: Journal of the American Chemical Society, vol. 134, no. 44, pp. 18157–18160, 2012. DOI: 10.1021/ja307297c |
Dielectric properties of highly filled thermoplastics for printed circuit boards Journal Article In: Journal of Applied Polymer Science, vol. 128, no. 6, pp. 3758–3770, 2012. DOI: 10.1002/app.38602 |
Impact of large aspect ratio, shear-stiff, mica-like clay on mechanical behaviour of PMMA/clay nanocomposites Journal Article In: Polymer, vol. 53, no. 15, pp. 3230–3237, 2012. |
Influence of polymeric flame retardants based on phosphorus-containing polyesters on morphology and material characteristics of poly(butylene terephthalate) Journal Article In: Journal of Applied Polymer Science, vol. 128, no. 5, pp. 3315–3324, 2012. DOI: 10.1002/app.38520 |
Phosphorus Polyester - an Alternative to Low-Molecular-Weight Flame Retardants in Poly(Butylene Terephthalate)? Journal Article In: Macromolecular Chemistry and Physics, vol. 213, no. 22, pp. 2386–2397, 2012. |
The miscibility of poly(butylene terephthalate) (PBT) with phosphorus polyester flame retardants Journal Article In: High Performance Polymers, vol. 24, no. 1, pp. 64–73, 2012. |
Viscoelastic properties of solutions of polystyrene melts and carbon dioxide: Analysis of a transient shear rheology approach Journal Article In: Journal of Rheology, vol. 56, no. 4, pp. 743–766, 2012. DOI: 10.1122/1.4708601 |
Barrier Properties of Polyamide 12 Films Nucleated with Talc Journal Article In: Journal of Plastics Technology, vol. 8, no. 4, pp. 331-350, 2012. |
Overmoulding of Plane Structural Foamed Parts with a Second Thermoplastic Component Journal Article In: Cellular Polymers, vol. 31, no. 4, pp. 189-206, 2012. |
Investigation of structure–property relationships of polyisobutylene-based biomaterials: Morphology, thermal, quasi-static tensile and long-term dynamic fatigue behavior Journal Article In: Journal of the Mechanical Behavior of Biomedical Materials, vol. 10, pp. 206–215, 2012. |
2011 |
Melt processing, mechanical, and fatigue crack propagation properties of reactively compatibilized blends of polyamid 6 and acrylonitrile-butadiene-styrene copolymer Journal Article In: Journal of Applied Polymer Science, vol. 124, no. 1, pp. 740-754, 2011. DOI: 10.1002/app.35055 |
Structure-property relationships of halogen-free flame-retarded poly(butylene terephthalate) and glass fiber reinforced PBT Journal Article In: Journal of Applied Polymer Science, vol. 1, no. 1, pp. 9-18, 2011. DOI: 10.1002/app.34910 |
High-performance substrate based on a highly filled thermoplastic polymer Journal Article In: Circuit World, vol. 37, no. 1, pp. 4–14, 2011. |
HF-Leiterplatten mit erhöhten Gebrauchstemperaturen auf Basis thermoplastischer Substratmaterialien Journal Article In: Plus 9, 2011. |
Investigation of melt processing conditions on the dispersion grade of nanosilica in a polystyrene matrix by creep-recovery experiments Journal Article In: Polymer International, 2011. |
TPU/Mica composites prepared in torque rheometer: processability, mechanical properties and morphology Journal Article In: Chemistry&Chemical Technology, vol. 5, no. 2, pp. 191-195, 2011. |
Structure-property relationships of halogen-free flame-retarded poly(butylene terephthalate) and glass fiber reinforced PBT Journal Article In: Journal of Applied Polymer Science, vol. 1, no. 1, pp. 9-18, 2011. DOI: 10.1002/app.34910 |
Melt processing, mechanical, and fatigue crack propagation properties of reactively compatibilized blends of polyamid 6 and acrylonitrile-butadiene-styrene copolymer Journal Article In: Journal of Applied Polymer Science, vol. 124, no. 1, pp. 740-754, 2011. DOI: 10.1002/app.35055 |
Synthesis of new dibenzo[c.e][1,2]oxaphosphorine 2-oxide containing diols based on diethanolamine Journal Article In: Heteroatom Chemistry, vol. 23, no. 2, pp. 146–153, 2011. DOI: 10.1002/hc.20763 |
High-performance substrate based on a highly filled thermoplastic polymer Journal Article In: Circuit World, vol. 37, no. 1, pp. 4–14, 2011. |
Influence of molar mass and temperature on the dynamics of network formation in polycarbonate/carbon nanotubes composites in oscillatory shear flows Journal Article In: Polymer, vol. 52, no. 2, pp. 430–442, 2011. |
Influence of Processing Parameters on the Fiber Length and Impact Properties of Injection Molded Long Glass Fiber Reinforced Polypropylene Journal Article In: International Polymer Processing, vol. 26, no. 3, pp. 292–303, 2011. DOI: 10.3139/217.2442 |
Influence of supramolecular additives on foam morphology of injection-molded i-PP Journal Article In: Journal of Cellular Plastics, vol. 47, no. 6, pp. 519–534, 2011. |
Novel DOPO-based flame retardants in high-performance carbon fibre epoxy composites for aviation Journal Article In: European Polymer Journal, vol. 47, no. 5, pp. 1081–1089, 2011. |
On the determination of elastic properties of composites of polycarbonate and multi-wall carbon nanotubes in the melt Journal Article In: Rheologica Acta, vol. 50, no. 5-6, pp. 503–518, 2011. |
Toughened high performance epoxy resin system for aerospace applications Journal Article In: Science and Engineering of Composite Materials, vol. 18, no. 4, 2011. |
Foaming of immiscible blend systems compatibilized by SBM triblock terpolymers using ethanol and n-pentane as blowing agent Journal Article In: Journal of Cellular Plastics, accepted (2011)., 2011. |
TPU/Mica composites prepared in torque rheometer: processability, mechanical properties and morphology Journal Article In: Chemistry&Chemical Technology, vol. 5, no. 2, pp. 191-195, 2011. |
Caracterização térmica e dinâmico-mecânica de compósitos TPU/mica preparados em reômetro de torque Journal Article In: Polímeros, vol. 21, no. 3, pp. 240–245, 2011. |
Influence of molar mass and temperature on the dynamics of network formation in polycarbonate/carbon nanotubes composites in oscillatory shear flows Journal Article In: Polymer, vol. 52, no. 2, pp. 430–442, 2011. |
2010 |
Thermal decomposition study of poly(methyl methacrylate)/carbon nanofiller composites Journal Article In: Polymers for Advanced Technologies, vol. 22, no. 1, pp. 84–89, 2010. DOI: 10.1002/pat.1849 |
Tailored Additives to Improve the Electret Performance of Polycarbonates Journal Article In: Macromolecular Chemistry and Physics, vol. 211, no. 20, pp. 2179–2186, 2010. |
A New Halogen-Free Flame Retardant Based on 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide for Epoxy Resins and their Carbon Fiber Composites for the Automotive and Aviation Industries Journal Article In: Macromolecular Materials and Engineering, vol. 296, no. 1, pp. 14-30, 2010. |
Induction of Molecular Organization of Oligomers by Low-Energy Electrons Journal Article In: Macromolecular Rapid Communications, vol. 31, no. 7, pp. 634–639, 2010. |
Foaming of an Immiscible Blend System Using Organic Liquids as Blowing Agents Journal Article In: Journal of Cellular Plastics, vol. 46, no. 3, pp. 239–258, 2010. |
Relating Haptic Perception of Polymer Surfaces to their Objective Properties Journal Article In: Zeitschrift Kunststofftechnik / Journal of Plastics Technology, no. 01, pp. 50-64, 2010. |
Relating Haptic Perception of Polymer Surfaces to their ObjectiveProperties Journal Article In: Zeitschrift Kunststofftechnik / Journal of Plastics Technology, pp. 50–64, 2010. |