Scientific Articles

Raps, D.; Vazquez, S. A. Sanchez; Heymann, L.; Altstädt, V.

Rheology and Crystallization of Polypropylene Journal Article

In: G.I.T. Laboratory Journal, no. 11-12, pp. 42-44, 2016.

Schreier, P.; Mühlbacher, M.; Fafara, M.; Neumeyer, T.; Altstädt, V.

Sandwichkonzepte auf Basis thermoplastischer Partikelschäume Journal Article

In: Plastverarbeiter, 2016.

Fafara, M.; Standau, T.; Neumeyer, T.; Altstädt, V.

Temperaturbeständigkeit - Wenn EPP und EPS ins Schwitzen kommen Journal Article

In: K-Magazin, vol. 4, 2016.

Balzereit, S.; Altstädt, V.; Prös, F.; Starzynski, K.; Strubel, V.

Selektive Metallisierung von Metallpartikeln gefülltem Kunststoff durch Laseraktivierung Journal Article

In: Erfindungsmeldung, 2016.

Bärwinkel, Stefanie; Bahrami, Ronak; Löbling, Tina I.; Schmalz, Holger; Müller, Axel H. E.; Altstädt, Volker

Polymer Foams Made of Immiscible Polymer Blends Compatibilized by Janus Particles-Effect of Compatibilization on Foam Morphologyhspace0.167em Journal Article

In: Advanced Engineering Materials, vol. 18, no. 5, pp. 814–825, 2015.

DOI: 10.1002/adem.201500387

Neumeyer, Thomas; Staudigel, Christian; Bonotto, Giancarlo; Altstaedt, Volker

Influence of an imidazolium salt on the curing behaviour of an epoxy-based hot-melt prepreg system for non-structural aircraft applications Journal Article

In: CEAS Aeronautical Journal, vol. 6, no. 1, pp. 31–37, 2015, ISSN: 1869-5590.

DOI: 10.1007/s13272-014-0127-y

https://doi.org/10.1007/s13272-014-0127-y

Altstädt, Volker

Extrusionsschaum aus Polylactid - ein nachhaltiges Material Journal Article

In: Jahresmagazin Kunststofftechnik, 2015.

Göttermann, S.; Weinmann, S.; Bonten, C.; Standau, T.; Altstädt, V.

Foams made from modified standard PLA Journal Article

In: bioplastics Magazine, vol. 10, no. 04, 2015.

Baumgart, C.; Hübner, F.; Altstädt, V.

Kleine Lücken zum leichteren Drücken - Mikrosphären in Flüssigsilikonen schäumen Journal Article

In: Kunststoffe, no. 11, pp. 84-87, 2015.

Kothmann, Martin Heinz; Ziadeh, Mazen; Bakis, Gökhan; de Anda, Agustin Rios; Breu, Josef; Altstädt, Volker

Analyzing the influence of particle size and stiffness state of the nanofiller on the mechanical properties of epoxy/clay nanocomposites using a novel shear-stiff nano-mica Journal Article

In: Journal of Materials Science, vol. 50, no. 14, pp. 4845–4859, 2015.

DOI: 10.1007/s10853-015-9028-7

Yin, Huajie; Dittrich, Bettina; Farooq, Muhammad; Kerling, Sabrina; Wartig, Karen-Alessa; Hofmann, Daniel; Huth, Christian; Okolieocha, Chimezie; Altstädt, Volker; Schönhals, Andreas; Schartel, Bernhard

Carbon-based nanofillers/Poly(butylene terephthalate): thermal, dielectric, electrical and rheological properties Journal Article

In: Journal of Polymer Research, vol. 22, no. 7, 2015.

DOI: 10.1007/s10965-015-0785-4

Kothmann, M H; Zeiler, R; de Anda, Rios A; Brückner, A; Altstädt, V

Fatigue crack propagation behaviour of epoxy resins modified with silica-nanoparticles Journal Article

In: Polymer, vol. 60, pp. 157–163, 2015.

DOI: 10.1016/j.polymer.2015.01.036

Fathi, Amir; Keller, Jan-Hendrik; Altstaedt, Volker

Full-field shear analyses of sandwich core materials using Digital Image Correlation (DIC) Journal Article

In: Composites Part B: Engineering, vol. 70, pp. 156–166, 2015.

DOI: 10.1016/j.compositesb.2014.10.045

Njuhovic, E; Bräu, M; Wolff-Fabris, F; Starzynski, K; Altstädt, V

Identification of failure mechanisms of metallised glass fibre reinforced composites under tensile loading using acoustic emission analysis Journal Article

In: Composites Part B: Engineering, vol. 81, pp. 1–13, 2015.

DOI: 10.1016/j.compositesb.2015.06.018

Okolieocha, Chimezie; Köppl, Thomas; Kerling, Sabrina; Tölle, Folke J; Fathi, Amir; Mülhaupt, Rolf; Altstädt, Volker

Influence of graphene on the cell morphology and mechanical properties of extruded polystyrene foam Journal Article

In: Journal of Cellular Plastics, vol. 51, no. 4, pp. 413–426, 2015.

DOI: 10.1177/0021955x14566084

Okolieocha, Chimezie; Raps, Daniel; Subramaniam, Kalaivani; Altstädt, Volker

Microcellular to nanocellular polymer foams: Progress (2004–2015) and future directions – A review Journal Article

In: European Polymer Journal, vol. 73, pp. 500–519, 2015.

DOI: 10.1016/j.eurpolymj.2015.11.001

Bahrami, Ronak; Löbling, Tina I; Schmalz, Holger; Müller, Axel H E; Altstädt, Volker

Micromechanics of "raspberry" morphology in PPE/SAN polymer blends compatibilized with linear ABC triblock terpolymers Journal Article

In: Polymer, vol. 80, pp. 52–63, 2015.

DOI: 10.1016/j.polymer.2015.10.039

Okolieocha, Chimezie; Beckert, Fabian; Herling, Markus; Breu, Josef; Mülhaupt, Rolf; Altstädt, Volker

Preparation of microcellular low-density PMMA nanocomposite foams: Influence of different fillers on the mechanical, rheological and cell morphological properties Journal Article

In: Composites Science and Technology, vol. 118, pp. 108–116, 2015.

DOI: 10.1016/j.compscitech.2015.08.016

Altstädt, Volker; Krausch, Georg

Special issue – Polymer foams Journal Article

In: Polymer, vol. 56, pp. 3–4, 2015.

DOI: 10.1016/j.polymer.2014.11.001

Neumeyer, T.; Bauernfeind, A.; Eigner, V.; Mueller, C.; Pramberger, K.; Neumeyer, V. AltstaedtT.; Bauernfeind, A.; Eigner, V.; Mueller, C.; Pramberger, K.; Altstaedt, V.

Novel Epoxy Prepreg Resins for Aircraft Interiors Based on Combinations of Halogen-Free Flame Retardants Journal Article

In: DGLR Tagung, (2015)., 2015.

Raps, Daniel; Hossieny, Nemat; Park, Chul B; Altstädt, Volker

Past and present developments in polymer bead foams and bead foaming technology Journal Article

In: Polymer, vol. 56, pp. 5-19, 2015.

DOI: 10.1016/j.polymer.2014.10.078

Duan, Gaigai; Jiang, Shaohua; ô, Valérie Jér; Wendorff, Joachim H; Fathi, Amir; Uhm, Jaqueline; Altstädt, Volker; Herling, Markus; Breu, Josef; Freitag, Ruth; Agarwal, Seema; Greiner, Andreas

Ultralight, Soft Polymer Sponges by Self-Assembly of Short Electrospun Fibers in Colloidal Dispersions Journal Article

In: Advanced Functional Materials, vol. 25, no. 19, pp. 2850–2856, 2015.

DOI: 10.1002/adfm.201500001

Hausner, Josef; Ziadeh, Mazen; Fischer, Bianca; Kalo, Hussein; Schmid, Jasmin; Kunz, Raphael; Altstädt, Volker; Breu, Josef

Transfer batch blending, an innovative solvent/solid assisted method for melt compounding to achieve good dispersion quality for polymer–clay-nanocomposite Journal Article

In: Composites Science and Technology, vol. 114, pp. 34-41, 2015.

DOI: 10.1016/j.compscitech.2015.03.019

Bärwinkel, Stefanie; Bahrami, Ronak; Löbling, Tina I; Schmalz, Holger; Müller, Axel H E; Altstädt, Volker

Polymer Foams Made of Immiscible Polymer Blends Compatibilized by Janus Particles-Effect of Compatibilization on Foam Morphologyhspace0.167em Journal Article

In: Advanced Engineering Materials, vol. 18, no. 5, pp. 814–825, 2015.

DOI: 10.1002/adem.201500387

Schartel, Bernhard; Perret, Birgit; Dittrich, Bettina; Ciesielski, Michael; Krämer, Johannes; Müller, Patrick; Altstädt, Volker; Zang, Lin; Döring, Manfred

Flame Retardancy of Polymers: The Role of Specific Reactions in the Condensed Phase Journal Article

In: Macromolecular Materials and Engineering, vol. 301, no. 1, pp. 9-35, 2015.

DOI: 10.1002/mame.201500250

Neumeyer, Thomas; Staudigel, Christian; Bonotto, Giancarlo; Altstaedt, Volker

Influence of an imidazolium salt on the curing behaviour of an epoxy-based hot-melt prepreg system for non-structural aircraft applications Journal Article

In: CEAS Aeronautical Journal, vol. 6, no. 1, pp. 31–37, 2015, ISSN: 1869-5590.

DOI: 10.1007/s13272-014-0127-y

https://doi.org/10.1007/s13272-014-0127-y

Zeiler, Rico; Kuttner, Christian; Khalid, Ubaid; Kothmann, Martin H; Dijkstra, Dirk J; Altstädt, Volker

The role of multi-walled carbon nanotubes in epoxy nanocomposites and resin transfer molded glass fiber hybrid composites: Dispersion, local distribution, thermal, and fracture/mechanical properties Journal Article

In: Polymer Composites, 2015.

DOI: 10.1002/pc.23755

Fischer, B; Ziadeh, M; Breu, J; Altstäd, V

Evaluierung von Struktur-Eigenschaftsbeziehungen in PMMA-Nanokompositen auf Basis einer neuen Generation an Schichtsilikaten Journal Article

In: Zeitschrift Kunstofftechnik / Journal of Plastics Technology, no. 3, pp. 131–156, 2015.

Njuhovic, E.; Bräu, M.; Wolff-Fabris, F.; Starzynski, K.; Altstädt, V.

Identification of interface failure mechanisms of metallized glass fibre reinforced composites using acoustic emission analysis Journal Article

In: Composites Part B: Engineering, vol. 66, pp. 443–452, 2014.

DOI: 10.1016/j.compositesb.2014.06.018

Tarpani, J R; Canto, R B; Saracura, R G M; Ibarra-Castanedo, C; Maldague, X P V

Compression After Impact and Fatigue of Reconsolidated Fiber-reinforced Thermoplastic Matrix Solid Composite Laminate Journal Article

In: Procedia Materials Science, vol. 3, pp. 485–492, 2014.

DOI: 10.1016/j.mspro.2014.06.081

Njuhovic, E.; Neumeyer, T.; Glöde, S.; Altstädt, V.

Eine Frage der Haftung - Oberflächenmodifikation duromerer Faserverbundkunststoffe Journal Article

In: Kunststoffe, no. 7, 2014.

Trassl, C.; Altstädt, V.

Leichtbau- und Designwerkstoffe der Zukunft Journal Article

In: Kunststoffe, no. 2, pp. 73-76., 2014.

Njuhovic, E.; Altstädt, V.

Polymer Engineering - Metallisierte Faserverbundstrukturen - wie Kunststoffe zu alternativen Antriebstechnologien beitragen Journal Article

In: Jahresmagazin der Ingenieurwissenschaften, (2014)., 2014.

Standau, T.; Altstädt, V.

Polymer-Schaum aus Pflanzen: ein nachhaltiges Material Journal Article

In: Spektrum, vol. 83, no. 2, 2014.

Cestari, Sibele Piedade; Mendes, Luis Claudio; Altstädt, Volker; Mano, Eloisa Biasotto; ç, Daniela Fran; Keller, Jan-Hendrik

Crystallization Kinetics of Recycled High Density Polyethylene and Coffee Dregs Composites Journal Article

In: Polymers and Polymer Composites, vol. 22, no. 6, pp. 541-550, 2014.

DOI: 10.1177/096739111402200606

Kempf, M; Skrabala, O; Altstädt, V

Acoustic emission analysis for characterisation of damage mechanisms in fibre reinforced thermosetting polyurethane and epoxy Journal Article

In: Composites Part B: Engineering, vol. 56, pp. 477–483, 2014.

DOI: 10.1016/j.compositesb.2013.08.080

Moud, Aref Abbasi; Javadi, Azizeh; Nazockdast, Hossein; Fathi, Amir; Altstaedt, Volker

Effect of dispersion and selective localization of carbon nanotubes on rheology and electrical conductivity of polyamide 6 (PA6), Polypropylene (PP), and PA6/PP nanocomposites Journal Article

In: Journal of Polymer Science Part B: Polymer Physics, vol. 53, no. 5, pp. 368–378, 2014.

DOI: 10.1002/polb.23638

Njuhovic, E; Bräu, M; Wolff-Fabris, F; Starzynski, K; Altstädt, V

Identification of interface failure mechanisms of metallized glass fibre reinforced composites using acoustic emission analysis Journal Article

In: Composites Part B: Engineering, vol. 66, pp. 443–452, 2014.

DOI: 10.1016/j.compositesb.2014.06.018

Ziadeh, Mazen; Fischer, Bianca; Schmid, Jasmin; Altstädt, Volker; Breu, Josef

On the importance of specific interface area in clay nanocomposites of~PMMA filled with synthetic nano-mica Journal Article

In: Polymer, vol. 55, no. 16, pp. 3770–3781, 2014.

DOI: 10.1016/j.polymer.2014.05.063

Raps, Daniel; Köppl, Thomas; de Anda, Agustin Rios; Altstädt, Volker

Rheological and crystallisation behaviour of high melt strength polypropylene under gas-loading Journal Article

In: Polymer, vol. 55, no. 6, pp. 1537–1545, 2014.

DOI: 10.1016/j.polymer.2014.01.036

Götz, C; Lim, G T; Puskas, J E; Altstädt, V

The effect of carbon black reinforcement on the dynamic fatigue and creep of polyisobutylene-based biomaterials Journal Article

In: Journal of the Mechanical Behavior of Biomedical Materials, vol. 39, pp. 355–365, 2014.

DOI: 10.1016/j.jmbbm.2014.08.008

Bahrami, Ronak; Löbling, Tina I; é, Andr; Schmalz, Holger; Müller, Axel H E; Altstädt, Volker

The Impact of Janus Nanoparticles on the Compatibilization of Immiscible Polymer Blends under Technologically Relevant Conditions Journal Article

In: ACS Nano, vol. 8, no. 10, pp. 10048–10056, 2014.

DOI: 10.1021/nn502662p

Ziadeh, Mazen; Weiss, Stephan; Fischer, Bianca; Förster, Stephan; Altstädt, Volker; Müller, Axel H E; Breu, Josef

Towards completely miscible PMMA nanocomposites reinforced by shear-stiff, nano-mica Journal Article

In: Journal of Colloid and Interface Science, vol. 425, pp. 143–151, 2014.

DOI: 10.1016/j.jcis.2014.03.040

Köppl, T; Raps, D; Altstädt, V

E-PBT—Bead foaming of poly(butylene terephthalate) by underwater pelletizing Journal Article

In: Journal of Cellular Plastics, vol. 50, no. 5, pp. 475-487, 2014.

DOI: 10.1177/0021955x14528524

Brehme, Sven; Köppl, Thomas; Schartel, Bernhard; Altstädt, Volker

Competition in aluminium phosphinate-based halogen-free flame retardancy of poly(butylene terephthalate) and its glass-fibre composite Journal Article

In: e-Polymers, vol. 14, no. 3, 2014.

DOI: 10.1515/epoly-2014-0029

Kersch, M; Pischke, L; Schmidt, H -W; Altstädt, V

Influence of trisamide-based additives on the morphological and mechanical properties of isotactic polypropylen Journal Article

In: Polymer, vol. 55, no. 15, pp. 3227-3233, 2014.

DOI: 10.1016/j.polymer.2014.05.030

Sprenger, S; Kothmann, M H; Altstädt, V

Carbon fiber-reinforced composites using an epoxy resin matrix modified with reactive liquid rubber and silica nanoparticle Journal Article

In: Composites Science and Technology, vol. 105, pp. 86-95, 2014.

DOI: 10.1016/j.compscitech.2014.10.003

de Anda, Agustin Rios; Neumeyer, Thomas; Lengsfeld, H; Rademacker, T; Altstädt, Volker

Recycled carbon-fiber fleeces as a green alternative for reinforcing in-plane mechanical properties of thermoset composites Journal Article

In: 16th European Conference on Composite Materials, ECCM 2014, 2014.

Tarpani, J. R.; Canto, R. B.; Saracura, R. G. M.; Ibarra-Castanedo, C.; Maldague, X. P. V.

Compression After Impact and Fatigue of Reconsolidated Fiber-reinforced Thermoplastic Matrix Solid Composite Laminate Journal Article

In: Procedia Materials Science, vol. 3, pp. 485–492, 2014.

DOI: 10.1016/j.mspro.2014.06.081

Mariano, Roberta M; Nunes, Regina C R; Visconte, Leila L Y; Altstaedt, Volker

Efeito da hibridização de montmorilonita e celulose II sobre as propriedades mecânicas de nanocompósitos de borracha natural Journal Article

In: Polímeros, vol. 23, no. 1, pp. 123–127, 2013.

DOI: 10.1590/s0104-14282013005000012