Scientific Articles

Hoffmann, Michael; Zahedtalaban, Mohamad; Denk, Jakob; Horcher, Alexander; Ruckdäschel, Holger; Schafföner, Stefan; Motz, Günter

Photoinduced thiol-ene “click” chemistry for resource-efficient curing of polysilazane-based coatings and its effects on coating property profile Journal Article

In: Open Ceramics, vol. 15, pp. 100384, 2023.

DOI: https://doi.org/10.1016/j.oceram.2023.100384

https://www.sciencedirect.com/science/article/pii/S2666539523000561

Martin Demleitner Annika C Ackermann, Jajnabalkya Guhathakurta

Mechanical, thermal, and electrical properties of amine- and non-functionalized reduced graphene oxide/epoxy carbon fiber-reinforced polymers Journal Article

In: Polymer Composites, pp. 27461, 2023.

DOI: https://doi.org/10.1002/pc.27461

Sara Estaji Mohammad Iman Tayouri, Seyed Rasoul Mousavi

Polystyrene/Polyolefin Elastomer Blends Loaded with Halloysite Nanotubes: Morphological, Mechanical, and Gas Barrier Properties Journal Article

In: Macromolecular Materials and Engineering, pp. 2300080, 2023.

DOI: https://doi.org/10.1002/mame.202300080

https://onlinelibrary.wiley.com/doi/full/10.1002/mame.202300080

Fabian Hübner Florian Max, Michael Frisch

A scientific view on composite inlays in running shoes: The influence of epoxy crosslink density on bending and fatigue properties Journal Article

In: Results in Materials, vol. 18, pp. 100404, 2023.

DOI: https://doi.org/10.1016/j.rinma.2023.100404

https://www.sciencedirect.com/science/article/pii/S2590048X23000420

Tobias Standau Andreas Himmelsbach, Justus Kuhnigk

Investigation of the Reaction Kinetics of Poly(butylene terephthalate) and Epoxide Chain Extender Journal Article

In: Macromolecular Materials and Engineering, pp. 2200683, 2023.

DOI: https://doi.org/10.1002/mame.202200683

Julia Dreier Christian Brütting, Christian Bonten

Sustainable Immiscible Polylactic Acid (PLA) and Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) Blends: Crystallization and Foaming Behavior Journal Article

In: ACS Sustainable Chemistry and Engineering, vol. 11, iss. 17, pp. 6676–6687, 2023.

DOI: https://doi.org/10.1021/acssuschemeng.3c00199

https://pubs.acs.org/doi/abs/10.1021/acssuschemeng.3c00199

Koch, Ilja; Preiß, Gina; Müller-Pabel, Michael; Grüber, Bernd; Meuchelböck, Johannes; Ruckdäschel, Holger; Gude, Maik

Analysis of density-dependent bead and cell structure of expanded polypropylene bead foams from X-ray computed tomography of different resolution Journal Article

In: Journal of Cellular Plastics, vol. 59, iss. 2, 2023.

DOI: https://doi.org/10.1177/0021955X231165343

https://journals.sagepub.com/doi/abs/10.1177/0021955X231165343

Christian Bethke Ngoc Uy Lan Du, Shuaiping Gong

Foaming epoxy-amine-carbamate: The effect of different neat amines on rheological and cellular morphology Journal Article

In: Journal of Cellular Plastics, vol. 59, iss. 3, 2023.

DOI: https://doi.org/10.1177/0021955X231166007

https://journals.sagepub.com/doi/full/10.1177/0021955X231166007

Meuchelböck, Johannes; Raps, Daniel; Brückner, Alexander; Altstädt, Volker; Ruckdäschel, Holger

Flexural fatigue behaviour and damage mechanism of polystyrene bead foams—Influence of the foam density Journal Article

In: International Journal of Fatigue , iss. 180, pp. 108095, 2023.

DOI: doi.org/10.1016/j.ijfatigue.2023.108095

Hanieh Khonakdar Amirali Soleimanpour, Seyed Rasoul Mousavi

Continuous extrusion foaming process of biodegradable nanocomposites based on poly(lactic acid)/carbonaceous nanoparticles with different geometric shapes: An insight into involved physical, chemical and rheological phenomena Journal Article

In: Journal of Applied Polymer Science, vol. 140, iss. 19, pp. e53822, 2023.

DOI: https://doi.org/10.1002/app.53822

https://onlinelibrary.wiley.com/doi/full/10.1002/app.53822

Amirhosein Yazdanbakhsh Saba Nemati Mahand, Mohammad Iman Tayouri

Theoretical and experimental investigation of selective gas permeability in polystyrene/polyolefin elastomer/nanoclay nanocomposite films Journal Article

In: Polymer Testing, vol. 120, pp. 107960, 2023.

DOI: https://doi.org/10.1016/j.polymertesting.2023.107960

https://www.sciencedirect.com/science/article/pii/S0142941823000405

Armaghan Moghaddam Mohammad Safari, Abolfazl Salehi Moghaddam

Carbon-based biosensors from graphene family to carbon dots: A viewpoint in cancer detection Journal Article

In: Talanta, vol. 258, pp. 124399, 2023.

DOI: https://doi.org/10.1016/j.talanta.2023.124399

Florian Rothenhäusler, Holger Ruckdaeschel

Amino Acids as Bio-Based Curing Agents for Epoxy Resin: Correlation of Network Structure and Mechanical Properties Journal Article

In: Polymers MDPI, vol. 15, iss. 2, pp. 385, 2023.

DOI: https://doi.org/10.3390/polym15020385

Florian Rothenhäusler Rodrigo Q. Albuquerque, Philipp Gröbel; Ruckdäschel, Holger

Multi-Objective Optimization of Sustainable Epoxy Resin Systems through Bayesian Optimization and Machine Learning Journal Article

In: ACS Applied Engineering Materials , 2023.

DOI: doi.org/10.1021/acsaenm.3c00590

Niko Krebs Justus Kuhnigk, Christian Mielke

Influence of Molecular Weight on the Bead Foaming and Bead Fusion Behavior of Poly (butylene terephthalate)(PBT) Journal Article

In: Industrial & Engineering Chemistry Research, vol. 61, iss. 49, pp. 17904-17914, 2022.

DOI: https://doi.org/10.1021/acs.iecr.2c03233

Julia Dreier Christian Brütting, Christian Bonten

Glass transition of PLA-CO2 mixtures after solid-state saturation Journal Article

In: Journal of Cellular Plastics, vol. 58, iss. 6, 2022.

DOI: https://doi.org/10.1177/0021955X221144543

Martin Demleitner Jan David Hübsch, Simon Bard

Influence of Skydrol immersion at elevated temperatures on the thermo-mechanical properties of a high-Tg anhydride epoxy resin toughened with a hydroxy-terminated polyester Journal Article

In: Journal of Applied Polymer Science, vol. 140, iss. 1, pp. e53263, 2022.

DOI: https://doi.org/10.1002/app.53263

https://onlinelibrary.wiley.com/doi/full/10.1002/app.53263

Florian Rothenhäusler, Holger Ruckdaeschel

L-Arginine as Bio-Based Curing Agent for Epoxy Resins: Temperature-Dependence of Mechanical Properties Journal Article

In: Polymers MDPI, iss. 14, pp. 4696, 2022.

DOI: https://doi.org/10.3390/polym14214696

Florian Rothenhäusler, Holger Ruckdaeschel

L-Arginine as a Bio-Based Curing Agent for Epoxy Resins: Glass Transition Temperature, Rheology and Latency Journal Article

In: Polymers MDPI, iss. 14, pp. 4331, 2022.

DOI: https://doi.org/10.3390/polym14204331

Alexander Brückner Ping Zhu, Thomas Neumeyer

Fatigue Characteristics of Poly(ether-b-amide) Elastomers during Cyclic Dynamic Tests and the Underlying Microstructural Evolution Journal Article

In: Industrial & Engineering Chemistry Research, vol. 61, iss. 40, pp. 14760-14771, 2022.

DOI: https://doi.org/10.1021/acs.iecr.2c02176

Anika Mauel Nora Meides, Teresa Menzel

Quantifying the fragmentation of polypropylene upon exposure to accelerated weathering Journal Article

In: Microplastics and Nanoplastics, vol. 2, iss. 1, pp. 23, 2022.

https://link.springer.com/article/10.1186/s43591-022-00042-2

Jokin Zubizarreta Julia Utz, Nico Geis

3D Printed Cellulose-Based Filaments—Processing and Mechanical Properties Journal Article

In: Materials MDPI, vol. 15, iss. 19, pp. 6582, 2022.

DOI: https://doi.org/10.3390/ma15196582

Hossein Ali Khonakdar Fatemeh Azadi, Seyed Hassan Jafari

The effect of tailoring morphology on rheology and dielectric properties of poly (lactic acid) /thermoplastic polyurethane/graphene oxide nanocomposites Journal Article

In: Materials Today Communications, vol. 33, pp. 104497, 2022.

DOI: https://doi.org/10.1016/j.mtcomm.2022.104497

https://www.sciencedirect.com/science/article/abs/pii/S2352492822013381

Seyyed Hassan Jafari Atefeh Torabi, Hossein Ali Khonakdar

Development of electroactive nanocomposites based on poly(vinylidene fluoride-hexafluoropropylene)/polycarbonate blends with improved dielectric, thermal, and mechanical properties Journal Article

In: Journal of Polymer Research, vol. 29, pp. 425, 2022.

https://link.springer.com/article/10.1007/s10965-022-03257-2

Marcel Dippold, Holger Ruckdäschel

Influence of pressure-induced temperature drop on the foaming behavior of amorphous polylactide (PLA) during autoclave foaming with supercritical CO2 Journal Article

In: The Journal of Supercritical Fluids, vol. 190, pp. 105734, 2022.

DOI: https://doi.org/10.1016/j.supflu.2022.105734

Michael Hoffmann Fabian Hübner, Nicole Sommer

Temperature-dependent fracture behavior of towpreg epoxy resins for cryogenic liquid hydrogen composite vessels: The influence of polysiloxane tougheners on the resin yield behavior Journal Article

In: Polymer Testing, vol. 113, pp. 107678, 2022.

DOI: https://doi.org/10.1016/j.polymertesting.2022.107678

Rodrigo Q Albuquerque Ali Sarhadi, Martin Demleitner

Machine learning based thermal imaging damage detection in glass-epoxy composite materials Journal Article

In: Composite Structures, vol. 295, pp. 115786, 2022.

DOI: https://doi.org/10.1016/j.compstruct.2022.115786

https://www.sciencedirect.com/science/article/pii/S0263822322005591

Niko Krebs Justus Kuhnigk, Tobias Standau

Evaluation of the Fusion Quality of Bead Foams Made from Polybutylene Terephthalate (E-PBT) Depending on the Processing Temperature Journal Article

In: Macromolecular Materials and Engineering, vol. 307, iss. 11, pp. 2200419, 2022.

DOI: https://doi.org/10.1002/mame.202200419

Rodrigo Q Albuquerque Sven Meier, Martin Demleitner

Modeling glass transition temperatures of epoxy systems: a machine learning study Journal Article

In: Computation & theory, vol. 57, pp. pages13991–14002, 2022.

Volker Altstädt Christian Bethke, Holger Ruckdäsche

Preparation of pros-foam sheets and their epoxy foams using the solid-state carbamate-foaming technique Journal Article

In: Polymer Elsevier, vol. 254, pp. 125080, 2022.

DOI: https://doi.org/10.1016/j.polymer.2022.125080

Florian Schönl Martin Demleitner, Jörg Angermann

Influence of Block Copolymer Concentration and Resin Crosslink Density on the Properties of UV‐Curable Methacrylate Resin Systems Journal Article

In: Macromolecular Materials and Engineering, vol. 307, iss. 10, pp. 2200320, 2022.

DOI: https://doi.org/10.1002/mame.202200320

Christian Brütting Du Ngoc Uy Lan, Christian Bethke

Novel Expandable Epoxy Beads and Epoxy Particle Foam Journal Article

In: Materials MDPI, iss. 15, pp. 4205, 2022.

DOI: 10.3390/ma15124205

Simon Shi Tobias Bubmann, Alexander Brueckner

Influence of Sample Wetting Method on ESC-Behavior of PMMA under Dynamic Fatigue Crack Propagation Journal Article

In: Materials MDPI, vol. 15, iss. 12, pp. 4114, 2022.

DOI: https://doi.org/10.3390/ma15124114

Justus Kuhnigk Christian Mielke, Doris Pospiech

Structure–Property–Processing Relations of Short-Chain Branched Poly(butylene terephthalate) (PBT) with Biobased Comonomers Journal Article

In: Macromolecular Materials and Engineering, vol. 307, iss. 9, pp. 2200208, 2022.

DOI: https://doi.org/10.1002/mame.202200208

Sara Estaji Seyed Rasoul Mousavi, Hediyeh Kiaei

A review of electrical and thermal conductivities of epoxy resin systems reinforced with carbon nanotubes and graphene-based nanoparticles Journal Article

In: Polymer Testing, vol. 112, pp. 107645, 2022.

DOI: https://doi.org/10.1016/j.polymertesting.2022.107645

Daniel Raps Nick Weingart, Justus Kuhnigk; Altstädt, Volker

Correction: Expanded Polycarbonate (EPC)—A New Generation of High-Temperature Engineering Bead Foams. Journal Article

In: Polymers MDPI, vol. 14, iss. 10, pp. 1991, 2022.

DOI: https://doi.org/10.3390/polym14101991

https://www.mdpi.com/2073-4360/14/10/1991/htm

Johnny Nguyen Caroline Sommer, Teresa Menzel

Weathering-induced oxidation: An investigation of artificially aged polystyrene samples using Laser-induced Breakdown Spectroscopy Journal Article

In: Polymer Testing , vol. 112, pp. 107623, 2022.

DOI: https://doi.org/10.1016/j.polymertesting.2022.107623

Peter Karlinger Sebastian Wiedl, Michael Schemme

Comparison of Melting Processes for WPC and the Resulting Differences in Thermal Damage, Emissions and Mechanics Journal Article

In: Materials MDPI, vol. 15, iss. 9, pp. 3393, 2022.

DOI: 10.3390/ma15093393

Tobias Standau Justus Kuhnigk, Dominik Dörr

Progress in the development of bead foams–A review Journal Article

In: Journal of Cellular Plastics, vol. 58, iss. 4, 2022.

DOI: https://doi.org/10.1177/0021955X221087603

Mehdi Entezam Elham Moradkhani, Mostafa Ahmadi

Irradiation processing to modify HDPE molecular architecture: Correlation with irradiation conditions and polymer grade Journal Article

In: Materials Today Communications, iss. 31, pp. 103462, 2022.

DOI: https://doi.org/10.1016/j.mtcomm.2022.103462

Peter Karlinger Frederik Obermeier, Michael Schemme

Thermoplastic Hybrid Composites with Wood Fibers: Bond Strength of Back-Injected Structures Journal Article

In: Materials MDPI, vol. 15, iss. 7, pp. 2473, 2022.

DOI: https://doi.org/10.3390/ma15072473

https://www.mdpi.com/1996-1944/15/7/2473

Nora Meides Teresa Menzel, Anika Mauel

Degradation of low-density polyethylene to nanoplastic particles by accelerated weathering Journal Article

In: Science of The Total Environment, vol. 826, pp. 154035, 2022.

DOI: https://doi.org/10.1016/j.scitotenv.2022.154035

Julia Utz Mohammadreza Nofar, Nico Geis

Foam 3D Printing of Thermoplastics: A Symbiosis of Additive Manufacturing and Foaming Technology Journal Article

In: Advanced Science, vol. 9, iss. 11, pp. 2105701, 2022.

DOI: https://doi.org/10.1002/advs.202105701

Tobias Standau Andreas Himmelsbach, Johannes Meuchelböck

Approach to quantify the resistance of polymeric foams against thermal load under compression Journal Article

In: Journal of Polymer Engineering, vol. 42, iss. 4, pp. 277-287, 2022.

DOI: https://doi.org/10.1515/polyeng-2021-0312

Gholamreza Pircheraghi Milad Goodarzi, Hossein Ali Khonakdar

Flexible high dielectric polystyrene/ethylene-α-octene copolymer/graphene nanocomposites: Tuning the morphology and dielectric properties by graphene's surface polarity Journal Article

In: Polymers for Advanced Technologies, vol. 33, iss. 3, pp. p. 937-951, 2022.

DOI: https://doi.org/10.1002/pat.5569

https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.5569?casa_token=VrRHRhcwbzQAAAAA:Qxj3X5dA-NiW31jzVk8aqWxSxyIrpU3j2QnUTENpZWQqdHdxbnWCM_mhD0yPTEVIkEb6pItcmehv2wIp

Christian Brütting Rodrigo Q Albuquerque, Tobias Standau

A machine learning investigation of low-density polylactide batch foams Journal Article

In: e-Polymers, vol. 22, iss. 1, pp. 318-331, 2022.

DOI: https://doi.org/10.1515/epoly-2022-0031

Andreas Seidel Tobias Bubmann, Holger Ruckdäschel

Transparent PC/PMMA Blends with Enhanced Mechanical Properties via Reactive Compounding of Functionalized Polymers Journal Article

In: Polymers MDPI, iss. 14, no. 1, pp. 73, 2021.

DOI: https://doi.org/10.3390/polym14010073

Christoph Callsen Michael Heinz, Waldemar Stöcklein

Halogen‐free flame‐retardant cable compounds: Influence of magnesium‐di‐hydroxide filler and coupling agent on EVA/LLDPE blend system morphology Journal Article

In: Polymer Engineering & Science, iss. 62, no. 2, pp. 461-471, 2021.

DOI: https://doi.org/10.1002/pen.25858

Martin Demleitner Eduardo Szpoganicz, Fabian Hübner

Phenolic prepregs for automated composites manufacturing – Correlation of rheological properties and environmental factors with prepreg tack Journal Article

In: Composites Science and Technology, iss. 218, pp. 109188, 2021.

DOI: https://doi.org/10.1016/j.compscitech.2021.109188

Christian Bethke Simon T Kaysser, Isabel Fernandez Romero

Investigations on Epoxy-Carbamate Foams Modified with Different Flame Retardants for High-Performance Applications Journal Article

In: Polymers MDPI, iss. 13, no. 22, pp. 3893, 2021.

DOI: https://doi.org/10.3390/polym13223893