Publications
Search all Publications
Fatigue Testing of Implantable Specimens: Effect of Sample Size and Branching on the Dynamic Fatigue Properties of Polyisobutylene-based Biomaterial Journal Article In: Polymer, vol. 50, pp. 591-597, 2009. |
Halloysite Nanocomposites: Natural Occuring Silicate Nanotubes as Reinforcement in Polyamide Journal Article In: Zeitschrift Kunststofftechnik/Journal of Plastics Technolog., vol. 1, 2009. |
Charge storage of electrospun fiber mats of poly(phenylene ether)/polystyrene blends Journal Article In: Polymer Engineering & Science, vol. 49, no. 12, pp. 2430–2439, 2009. DOI: 10.1002/pen.21493 |
The Effect of Radiation-induced Mobile Ions on Charge Decay in Electron-Beam Charged Polypropylene Films Containing additiv Journal Article In: J. Phys D: Appl. Phys, 42 (2009)., 2009. |
Charge storage of ternary polymer blends based on poly(phenylene ether) Journal Article In: Polymer International, vol. 58, no. 11, pp. 1260–1266, 2009. DOI: 10.1002/pi.2653 |
Mechanical performance of carbon fibre-reinforced composites based on stitched and bindered preforms Journal Article In: Composites Part A: Applied Science and Manufacturing, vol. 40, no. 11, pp. 1756–1763, 2009. |
Performance of carbon fibre-reinforced composites based on thermoplastic bindered preform Journal Article In: Composite Science and Technology, submitted, (2009)., 2009. |
Novel Polyisobutylene-Based Biocompatible TPE Nanocomposites Journal Article In: Rubber Chemistry and Technology, vol. 82, no. 4, pp. 461–472, 2009. DOI: 10.5254/1.3548258 |
Phosphoniumsalze als flammhemmende Additive Patent DE102007041988A1 (2009)., 2009. |
Rheology and properties of melt-processed poly(ether ether ketone)/multi-wall carbon nanotube composites Journal Article In: Polymer, vol. 50, no. 24, pp. 5803–5811, 2009. |
Toughness modification of epoxy resin by in-situ polymerization of the modifier Proceedings Article In: 11th Biannual Bayreuth Polymer Symposium, 2009. |
Confocal Raman microscopy: Non-destructive materials analysis with micrometer resolution Journal Article In: Rev.Adv.Mater.Sci, vol. 20, pp. 77-84, 2009. |
Viskoelastische Eigenschaften von Polyamid-Nanokompositen auf Basis des Minerals Halloysit Proceedings Article In: TA-Anwendertreffen „Rheologie“, 2009. |
Herstellung und Eigenschaften von kompakten und geschäumten Schichtsilikaten-Nanokompositen aus Polystyrol und Styrol-Butadien-Styrol-Blockcopolymeren PhD Thesis 2009. |
Effect of Architecture on the Fatigue Properties of SIBS Biomaterial Proceedings Article In: Ohio Innovation Summit, 2009. |
Morphology and properties of injection-moulded carbon-nanofibre poly(etheretherketone) foams Journal Article In: Journal of Materials Science, vol. 44, no. 6, pp. 1427–1434, 2009, ISSN: 1573-4803. |
Structural Foams of Styrene-Arylonitrile / Polycarbonate Blends: morphological aspects and correlation to rheological and mechanical propertie Proceedings Article In: 2009. |
Effect of Architecture on the Fatigue Properties of SIBS Biomaterial Proceedings Article In: 2009. |
Polystyrol-Acrylnitril Nanokomposite Schäum Proceedings Article In: 2009. |
Nicht-thermisch härtende Kohlenstofffaser-Kompositmaterialien auf Basis von Epoxidharze Proceedings Article In: 2009. |
IMC-Spritzgießcompounder - Potentiale der Langverstärkun Proceedings Article In: 2009. |
Electrets used as functional material Proceedings Article In: 1. International Workshop „Novel Developments and Applications in Sensor-Technology“, 2009. |
Analysis of Micromechanical and Fatigue Crack Propagation Properties of Reactively Compatibilized PA 6 / ABS Blend Proceedings Article In: 2009. |
Innovative resins with short curing cycles for the production of high performance composite Proceedings Article In: 2009. |
Numerical Simulation of Mechanical Properties of Cellular Materials Using Computed Tomography Analysis Journal Article In: Journal of Cellular Plastics, vol. 45, no. 5, pp. 441–460, 2009. |
Melt rheology of carbon nanofibres/nanotubes filled poly(ether ether ketone) composite PhD Thesis 2009. |
Understanding the Compressive Behavior of Linear and Cross-linked Poly(vinyl chloride) Foams Journal Article In: Journal of Cellular Plastics, vol. 45, no. 5, pp. 419–439, 2009. |
High Temperature PCB Substrates (>250 °C) based on Thermoplastic Polymer Proceedings Article In: 2009. |
Morphology-Charge Storage Relationships in Polymer Electrets PhD Thesis 2009. |
Influence of e-beam irradiation on the dynamic creep and fatigue properties of poly(aliphatic/aromatic-ester) copolymers for biomedical applications Journal Article In: Polymer, vol. 50, no. 23, pp. 5499–5507, 2009. |
Innovative Substrates for PCBs based on Thermoplastic Polymer Proceedings Article In: 2009. |
Toughness modification of electron beam curable epoxy matrices for carbon fibre composites PhD Thesis 2009. |
Untersuchung des Verformungsverhaltens feinzelliger Polyurethanschäume PhD Thesis 2009. |
Aspects of high-volume series production with high performance fibre-reiforced plastic Proceedings Article In: 2009. |
Serientaugliche Verfahren für faserverstärkte Kunststoffbauteil Proceedings Article In: 2009. |
Strategien und Innovationen bei der Matrixharzentwicklung für Faserverbundwerkstoff Proceedings Article In: 2009. |
Halogenfrei flammgeschützte Epoxidharze für Injektionsverfahre Proceedings Article In: 2009. |
Mechanical and Fatigue Crack Propagation Properties of Reactively Compatibilized Blends of Polyamide 6 and Styrenic Polymer Proceedings Article In: 2009. |
Viskoelastische Eigenschaften von Polyamid-Nanokompositen auf Basis des Minerals Halloysi Proceedings Article In: 2009. |
Trends in Polymer Foam Research Proceedings Article In: Blowing agents and foaming processes 2009 (11st international conference), 2009, ISBN: 978-1-8473-5392-4 1-8473-5392-4. |
Polystyrol-Acrylnitril Nanokomposite Schäume Proceedings Article In: Krenkel, Walter (Ed.): Verbundwerkstoffe : 17. Symposium Verbundwerkstoffe und Werkstoffverbunde, DGM Wiley-VCH, Weinheim, 2009, ISBN: 9783527326150, 9783527627110. |
Thermische und rheologische Eigenschaften von PA 6-Nanokompositen auf Basis von Silikat-Nanoröhrchen des Minerals Halloysi Proceedings Article In: 2009. |
Elastic Particle Foam Made from Polyolefins/Styrol Polymer Mixtures Patent WO/2009/112549, 2009. |
Linear and Nonlinear Rheology of PA 6 Composites with Silicate Nanotubes of the Mineral Halloysit Proceedings Article In: 2009. |
Halogenfrei flammgeschützte Epoxidharze für Injektionsverfahren Proceedings Article In: DGM Tagung, 2009. |
Cost-efficient Preforming Process for Complex High-Performance Fibre-reinforced Composites Journal Article In: Zeitschrift Kunststofftechnik / Journal of Plastics Technology, no. 4, pp. 278–298, 2009. |
High Temperature PCB Substrates (>250 °C) based on Thermoplastic Polymer Proceedings Article In: ECPE Seminar – Innovative Materials for Power Electronics, 2009. |
Electrets used as functional material Proceedings Article In: 2009. |
Organic liquids as blowing agents to foam an immiscible blend system Proceedings Article In: 25th Polymer Processing Society (PPS-25), 2009. |
Integrative processing methods for polypropylene combining structural foam injection moulding and injection moulding compounding technologie Proceedings Article In: 2009. |