Publikationen

Alle Publikationen durchsuchen

2016 Einträge « ‹ 17 von 41 › »

Puskas, J. E.; Santos, L. M. Dos; Fischer, F.; Götz, C.; Fray, M. El; Altstädt, V.; Tomkins, M.

Fatigue Testing of Implantable Specimens: Effect of Sample Size and Branching on the Dynamic Fatigue Properties of Polyisobutylene-based Biomaterial Artikel

In: Polymer, Bd. 50, S. 591-597, 2009.

Hedicke-Höchstötter, K.; Altstädt, V.

Halloysite Nanocomposites: Natural Occuring Silicate Nanotubes as Reinforcement in Polyamide Artikel

In: Zeitschrift Kunststofftechnik/Journal of Plastics Technolog., Bd. 1, 2009.

Lovera, Deliani; Bilbao, Cristina; Schreier, Philipp; Kador, Lothar; Schmidt, Hans-Werner; Altstädt, Volker

Charge storage of electrospun fiber mats of poly(phenylene ether)/polystyrene blends Artikel

In: Polymer Engineering & Science, Bd. 49, Nr. 12, S. 2430–2439, 2009.

DOI: 10.1002/pen.21493

Hillenbrand, J.; Motz, T.; Sessler, G. M.; Zhang, X.; Behrendt, N.; von Salis-Soglio, C.; Erhard, D. P.; Altstädt, V.; Schmidt, H. -W.

The Effect of Radiation-induced Mobile Ions on Charge Decay in Electron-Beam Charged Polypropylene Films Containing additiv Artikel

In: J. Phys D: Appl. Phys, 42 (2009)., 2009.

Lovera, Deliani; Ruckdäschel, Holger; Altstädt, Volker; Schmidt, Hans-Werner

Charge storage of ternary polymer blends based on poly(phenylene ether) Artikel

In: Polymer International, Bd. 58, Nr. 11, S. 1260–1266, 2009.

DOI: 10.1002/pi.2653

Beier, Uwe; Sandler, Jan K W; Altstädt, Volker; Spanner, Hermann; Weimer, Christian

Mechanical performance of carbon fibre-reinforced composites based on stitched and bindered preforms Artikel

In: Composites Part A: Applied Science and Manufacturing, Bd. 40, Nr. 11, S. 1756–1763, 2009.

DOI: 10.1016/j.compositesa.2009.08.012

Beier, U.; Sandler, J. K. W.; Altstädt, V.; Spanner, H.; Weimer, C.

Performance of carbon fibre-reinforced composites based on thermoplastic bindered preform Artikel

In: Composite Science and Technology, submitted, (2009)., 2009.

Lim, Goy Teck; Foreman-Orlowski, Elizabeth A; Porosky, Sara E; Pavka, Paul; Puskas, Judit E; Götz, Christian; Altstädt, Volker

Novel Polyisobutylene-Based Biocompatible TPE Nanocomposites Artikel

In: Rubber Chemistry and Technology, Bd. 82, Nr. 4, S. 461–472, 2009.

DOI: 10.5254/1.3548258

Döring, M.; Arnold, U.; Roth, M.; Barriau, E.; Schmidt-Freytag, U.; Altstädt, V.; Wolff-Fabris, F.

Phosphoniumsalze als flammhemmende Additive Patent

DE102007041988A1 (2009)., 2009.

Bangarusampath, D S; Ruckdäschel, Holger; Altstädt, Volker; Sandler, Jan K W; Garray, Didier; Shaffer, Milo S P

Rheology and properties of melt-processed poly(ether ether ketone)/multi-wall carbon nanotube composites Artikel

In: Polymer, Bd. 50, Nr. 24, S. 5803–5811, 2009.

DOI: 10.1016/j.polymer.2009.09.061

Goss, T M; Fabris, Wolff F; Altstädt, V

Toughness modification of epoxy resin by in-situ polymerization of the modifier Proceedings Article

In: 11th Biannual Bayreuth Polymer Symposium, 2009.

Allakhverdiev, Kerim R; Lovera, Deliani; Altstädt, Volker; Schreier, Philipp; Kador, Lothar

Confocal Raman microscopy: Non-destructive materials analysis with micrometer resolution Artikel

In: Rev.Adv.Mater.Sci, Bd. 20, S. 77-84, 2009.

Handge, U

Viskoelastische Eigenschaften von Polyamid-Nanokompositen auf Basis des Minerals Halloysit Proceedings Article

In: TA-Anwendertreffen „Rheologie“, 2009.

Lietz, Siljana

Herstellung und Eigenschaften von kompakten und geschäumten Schichtsilikaten-Nanokompositen aus Polystyrol und Styrol-Butadien-Styrol-Blockcopolymeren Promotionsarbeit

2009.

Pavka, P; Götz, C; Lim, G T; Handge, U A; Puskas, J E; Altstädt, V

Effect of Architecture on the Fatigue Properties of SIBS Biomaterial Proceedings Article

In: Ohio Innovation Summit, 2009.

Verdejo, Raquel; Werner, Philipp; Sandler, Jan; Altstädt, Volker; Shaffer, M S P

Morphology and properties of injection-moulded carbon-nanofibre poly(etheretherketone) foams Artikel

In: Journal of Materials Science, Bd. 44, Nr. 6, S. 1427–1434, 2009, ISSN: 1573-4803.

DOI: 10.1007/s10853-008-3168-y

https://doi.org/10.1007/s10853-008-3168-y

Altstädt, V.

Structural Foams of Styrene-Arylonitrile / Polycarbonate Blends: morphological aspects and correlation to rheological and mechanical propertie Proceedings Article

In: 2009.

Pavka, P.; Götz, C.; Lim, G. T.; Handge, U. A.; Puskas, J. E.; Altstädt, V.

Effect of Architecture on the Fatigue Properties of SIBS Biomaterial Proceedings Article

In: 2009.

Gutmann, P.; Greiner, C.; Ruckdäschel, H.; Bangarusampath, D. S.; Altstädt, V.

Polystyrol-Acrylnitril Nanokomposite Schäum Proceedings Article

In: 2009.

Wolff-Fabris, F.

Nicht-thermisch härtende Kohlenstofffaser-Kompositmaterialien auf Basis von Epoxidharze Proceedings Article

In: 2009.

Rohde, M.; Fischer, F.; Altstädt, V.; Herrmann, C.; Krenkel, W.; Hausherr, J. M.

IMC-Spritzgießcompounder - Potentiale der Langverstärkun Proceedings Article

In: 2009.

Götz, C

Electrets used as functional material Proceedings Article

In: 1. International Workshop „Novel Developments and Applications in Sensor-Technology“, 2009.

Handge, U. A.; Sailer, C.; Steininger, H.; Weber, M.; Michler, G. H.; Altstädt, V.

Analysis of Micromechanical and Fatigue Crack Propagation Properties of Reactively Compatibilized PA 6 / ABS Blend Proceedings Article

In: 2009.

Altstädt, V.

Innovative resins with short curing cycles for the production of high performance composite Proceedings Article

In: 2009.

Fischer, F; Lim, G T; Handge, U A; Altstädt, V

Numerical Simulation of Mechanical Properties of Cellular Materials Using Computed Tomography Analysis Artikel

In: Journal of Cellular Plastics, Bd. 45, Nr. 5, S. 441–460, 2009.

DOI: 10.1177/0021955x09339340

Sampath, D. S. Bangaru

Melt rheology of carbon nanofibres/nanotubes filled poly(ether ether ketone) composite Promotionsarbeit

2009.

Lim, G T; Altstädt, V; Ramsteiner, F

Understanding the Compressive Behavior of Linear and Cross-linked Poly(vinyl chloride) Foams Artikel

In: Journal of Cellular Plastics, Bd. 45, Nr. 5, S. 419–439, 2009.

DOI: 10.1177/0021955x09105372

Apeldorn, T.; Altstädt, V.; Glöde, S.

High Temperature PCB Substrates (>250 °C) based on Thermoplastic Polymer Proceedings Article

In: 2009.

Lovera, D.

Morphology-Charge Storage Relationships in Polymer Electrets Promotionsarbeit

2009.

Götz, C; Handge, U A; Piatek, M; Fray, El M; Altstädt, V

Influence of e-beam irradiation on the dynamic creep and fatigue properties of poly(aliphatic/aromatic-ester) copolymers for biomedical applications Artikel

In: Polymer, Bd. 50, Nr. 23, S. 5499–5507, 2009.

DOI: 10.1016/j.polymer.2009.09.051

Apeldorn, T.; Altstädt, V.; Lühnen, O.; Glöde, S.

Innovative Substrates for PCBs based on Thermoplastic Polymer Proceedings Article

In: 2009.

Fabris, F. Wolff

Toughness modification of electron beam curable epoxy matrices for carbon fibre composites Promotionsarbeit

2009.

Fölster, L.

Untersuchung des Verformungsverhaltens feinzelliger Polyurethanschäume Promotionsarbeit

2009.

Krämer, J.; Beier, U.; Altstädt, V.

Aspects of high-volume series production with high performance fibre-reiforced plastic Proceedings Article

In: 2009.

Altstädt, V.

Serientaugliche Verfahren für faserverstärkte Kunststoffbauteil Proceedings Article

In: 2009.

Krämer, J.

Strategien und Innovationen bei der Matrixharzentwicklung für Faserverbundwerkstoff Proceedings Article

In: 2009.

Krämer, J.; Beier, U.; Altstädt, V.; Stöß, K.; Diederichs, J.; Döring, M.; Perret, B.; Schartel, B.

Halogenfrei flammgeschützte Epoxidharze für Injektionsverfahre Proceedings Article

In: 2009.

Handge, U.; Sailer, C.; Steininger, H.; Michler, G. H.; Götz, C.; Fischer, F.; Lim, G. T.; Altstädt, V.

Mechanical and Fatigue Crack Propagation Properties of Reactively Compatibilized Blends of Polyamide 6 and Styrenic Polymer Proceedings Article

In: 2009.

Handge, U.

Viskoelastische Eigenschaften von Polyamid-Nanokompositen auf Basis des Minerals Halloysi Proceedings Article

In: 2009.

Ruckdäschel, Holger

Trends in Polymer Foam Research Proceedings Article

In: Blowing agents and foaming processes 2009 (11st international conference), 2009, ISBN: 978-1-8473-5392-4 1-8473-5392-4.

Gutmann, P; Greiner, C; Ruckdaeschel, H; Bangarusampath, D S; Altstatedt, V

Polystyrol-Acrylnitril Nanokomposite Schäume Proceedings Article

In: Krenkel, Walter (Hrsg.): Verbundwerkstoffe : 17. Symposium Verbundwerkstoffe und Werkstoffverbunde, DGM Wiley-VCH, Weinheim, 2009, ISBN: 9783527326150, 9783527627110.

DOI: 10.1002/9783527627110.ch24

Handge, U.

Thermische und rheologische Eigenschaften von PA 6-Nanokompositen auf Basis von Silikat-Nanoröhrchen des Minerals Halloysi Proceedings Article

In: 2009.

Schips, C; Hahn, K; Grässel, G; Longo-Schedel, D; Aßmann, J; Gietl, A; Knoll, K; Lambert, J; Ruckdäschel, H; Hofmann, M; Zylla, C

Elastic Particle Foam Made from Polyolefins/Styrol Polymer Mixtures Patent

WO/2009/112549, 2009.

Handge, U.

Linear and Nonlinear Rheology of PA 6 Composites with Silicate Nanotubes of the Mineral Halloysit Proceedings Article

In: 2009.

Krämer, J; Beier, U; Altstädt, V; Stöß, K; Diederichs, J; Döring, M; Perret, B; Schartel, B

Halogenfrei flammgeschützte Epoxidharze für Injektionsverfahren Proceedings Article

In: DGM Tagung, 2009.

Beier, U; Sandler, J K W; Altstädt, V; Hülder, G; Schmachtenberg, E; Spanner, H; Weimer, C; Roser, T; Buchs, W; Hassler, U

Cost-efficient Preforming Process for Complex High-Performance Fibre-reinforced Composites Artikel

In: Zeitschrift Kunststofftechnik / Journal of Plastics Technology, Nr. 4, S. 278–298, 2009.

Apeldorn, T; Altstädt, V; Glöde, S

High Temperature PCB Substrates (>250 °C) based on Thermoplastic Polymer Proceedings Article

In: ECPE Seminar – Innovative Materials for Power Electronics, 2009.

Götz, C.

Electrets used as functional material Proceedings Article

In: 2009.

Gutmann, P.; Hildebrandt, K.; Altstädt, V.; Müller, A. H. E.

Organic liquids as blowing agents to foam an immiscible blend system Proceedings Article

In: 25th Polymer Processing Society (PPS-25), 2009.

Altstädt, V.

Integrative processing methods for polypropylene combining structural foam injection moulding and injection moulding compounding technologie Proceedings Article

In: 2009.

2016 Einträge « ‹ 17 von 41 › »