Publikationen
Alle Publikationen durchsuchen
Rheological behaviour of a high-melt-strength polypropylene at elevated pressure and gas loading for foaming purposes Artikel In: Rheologica Acta, Bd. 56, Nr. 2, S. 95–111, 2016. |
Thermoplastic unidirectional tapes – an appropriate alternative to woven fabric based organo sheets Proceedings Article In: ECCM17 - 17th European Conference on Composite Materials, 2016. |
Back injection molding of FR4 with heat conductive polymers Proceedings Article In: AIP Conference Proceedings, Author(s), 2016. DOI: 10.1063/1.4965461 |
Lignin as renewable raw material for applications in electronics Proceedings Article In: AIP Conference Proceedings, Author(s), 2016. DOI: 10.1063/1.4965524 |
Modified standard polylactic acid (PLA) for extrusion foaming Proceedings Article In: AIP Conference Proceedings, Author(s), 2016. DOI: 10.1063/1.4965522 |
Foamed Plastics Buch American Cancer Society, 2016, ISBN: 9783527306732. DOI: 10.1002/14356007.a11_435.pub2 https://onlinelibrary.wiley.com/doi/abs/10.1002/14356007.a11_435.pub2 |
Trends in der Partikelschaumverarbeitung: Dampffrei verpackte Luft mit viel Potential Artikel In: VDWF im Dialog, Ausgabe 4, 2016, ISSN: 1860-4935. |
Einfluss der Nanopartikelgeometrie auf die Bruchzähigkeit und das Ermüdungsrissausbreitungsverhalten von Epoxidharzen Promotionsarbeit Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, 2016. |
Special Issue - Polymer Blends and Compatibilization Artikel In: Materials, Bd. 9, Nr. 8, 2016. |
Entwicklung von Biodiesel-resistenten Nitrilkautschukformulierungen Promotionsarbeit Universität Bayreuth, Lehrstuhl Polymere Werkstoffe / Institute of Chemistry at Rio de Janeiro State University, 2016. |
3D-Druck ermöglicht individuelle Funktionalisierung von Faserverbundkunststoffen Artikel In: CCeV-Magazin, Nr. 03, 2016. |
Polyurethanharze für Hochleistungs-Faserverbundwerkstoffe in Rotorblättern von Windenergieanlagen Promotionsarbeit Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, 2016. |
Acrylnitril-Butadien-Styrol Artikel In: Kunststoffe, Nr. 10, S. 96-101, 2016. |
Aus Zwei mach Eins Artikel In: Kunststoffe, Nr. 06, S. 52-54, 2016. |
Ein ungleiches Paar hält zusammen Artikel In: Kunststoffe, Nr. 08, S. 104-107, 2016. |
Faserverbundbauteile im Minutentakt Artikel In: Kunststoffe, Bd. 106, Nr. 10, S. 164-168, 2016. |
Kleiner Beitrag, starke Wirkung - mit Carbon Nanotubes modifizierte Epoxidharze als Matrix in Faser-Kunststoff-Verbundwerkstoffen Artikel In: Kunststoffe, Nr. 02, S. 35-39, 2016. |
Leicht und stark - Wolfsbacher Forscher entwickeln Prototypen für Bauteile aus Carbonbändern Artikel In: Tageszeitung, KURIER, Nr. 04, 2016. |
Luftiges Standardmaterial - Schäumbare Polyactide durch reaktive Extrusion Artikel In: Kunststoffe, Nr. 01, S. 68-71, 2016. |
Multi-Materialsysteme - Sandwich mit thermoplastischen Partikelschäumen Artikel In: Emobility tec, Bd. 2, Nr. 67, S. 34-38, 2016, ISSN: 0032-1338. |
Multiworking an zwei Tischen Artikel In: CCeV Magazin, Nr. 2, 2016. |
Polymere: Werkstoffe der Zukunft Artikel In: Spektrum, Bd. 1, Nr. 07, 2016. |
Rheology and Crystallization of Polypropylene Artikel In: G.I.T. Laboratory Journal, Nr. 11-12, S. 42-44, 2016. |
Sandwichkonzepte auf Basis thermoplastischer Partikelschäume Artikel In: Plastverarbeiter, 2016. |
Temperaturbeständigkeit - Wenn EPP und EPS ins Schwitzen kommen Artikel In: K-Magazin, Bd. 4, 2016. |
Selektive Metallisierung von Metallpartikeln gefülltem Kunststoff durch Laseraktivierung Artikel In: Erfindungsmeldung, 2016. |
Modified standard polylactic acid (PLA) for extrusion foaming Proceedings Article In: AIP Conference Proceedings 1779, 060001, Author(s), 2016. DOI: 10.1063/1.4965522 |
Fiber reinforcement for anisotropic foams Patent 2016. |
2nd Generation Layered Silicates Nanocomposites with improved Mechanical and Electrical Properties Proceedings Article In: S. 1728–1734, American Chemical Society (ACS), 2016. DOI: 10.1021/cm960127g |
Polymer Foams Made of Immiscible Polymer Blends Compatibilized by Janus Particles-Effect of Compatibilization on Foam Morphologyhspace0.167em Artikel In: Advanced Engineering Materials, Bd. 18, Nr. 5, S. 814–825, 2015. |
Influence of an imidazolium salt on the curing behaviour of an epoxy-based hot-melt prepreg system for non-structural aircraft applications Artikel In: CEAS Aeronautical Journal, Bd. 6, Nr. 1, S. 31–37, 2015, ISSN: 1869-5590. |
A novel Tool for continuous Processing of Polymer-metal-Hybrids Proceedings Article In: 20th International Conference on Composite Materials Copenhagen, Copenhagen, 2015. |
Expandierte Polyamidpellets und Verfahren zur Herstellung von Formkomponenten damit / Expanded Polyamide Pellets and Methods for Manufacturing Molded Components using them Patent 2015, (WO 2016/030333 A1). |
Prüfung von Verbundwerkstoffe Buchkapitel In: Grellmann, Wolfgang; Seidler, Sabine (Hrsg.): Kunststoffprüfung, S. 547–600, Carl Hanser Verlag, München, 2015, ISBN: 978-3-466-44350-1. |
A novel Tool for continuous Processing of Polymer-metal-Hybrids Proceedings Article In: 20th International Conference on Composite Materials Copenhagen, Copenhagen, 2015. |
Extrusionsschaum aus Polylactid - ein nachhaltiges Material Artikel In: Jahresmagazin Kunststofftechnik, 2015. |
Foams made from modified standard PLA Artikel In: bioplastics Magazine, Bd. 10, Nr. 04, 2015. |
Kleine Lücken zum leichteren Drücken - Mikrosphären in Flüssigsilikonen schäumen Artikel In: Kunststoffe, Nr. 11, S. 84-87, 2015. |
Multi-Functionaity of Polymer Composites: Challenges and New Polymer Composites: Challenges and New Solutions Buchkapitel In: Multi-Functionaity of Polymer Composites: Challenges and New Solution, Elsevier, Kidlington, Oxford, 2015, ISBN: 978-0-323-26434-1. |
Anforderungsgerechte, thermoplastische Preforms für den Hochleistungsleichtbau Promotionsarbeit Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, 2015. |
Struktur und Eigenschaften eines modular aufgebauten Epoxidharzsystem für Injektionsanwendungen Promotionsarbeit Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, 2015. |
Struktur und Eigenschaften neuer, flammgeschützter Prepreg-Matrixsysteme für Anwendungen in der Kabine von Verkehrsflugzeugen Promotionsarbeit Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, 2015. |
Extrusionsschaum aus Polylactid - ein nachhaltiges Material Sonstige 2015. |
Foams made from modified standard PLA Sonstige 2015. |
Kleine Lücken zum leichteren Drücken - Mikrosphären in Flüssigsilikonen schäumen Sonstige 2015. |
INFLUÊNCIA DA ABSORÇÃO DE BIODIESEL NAS PROPRIEDADES DA BORRACHA NITRÍLICA Proceedings Article In: Anais do XX Congresso Brasileiro de Engenharia Química, Editora Edgard Blücher, 2015. |
Modifiziertes Polylactid für die Schaumextrusion Proceedings Article In: 24. Stuttgarter Kunststoffkolloquium, Stuttgart, 2015. |
Novel Epoxy Prepreg Resins for Aircraft Interiors Based on Combinations of Halogen-Free Flame Retardants Proceedings Article In: DGLR Tagung, 2015. |
Weg mit der Wärme Sonstige 2015. |
Evaluierung von Struktur-Eigenschaftsbeziehungen in PMMA-Nanokompositen auf Basis einer neuen Generation an Schichtsilikaten Sonstige 2015. |