Konferenzbeiträge

Hoffmann, T.; Pospiech, D.; Sahre, K.; Häußler, L.; Döring, M.; R.Perez-Graterol,; Altstädt, V.; Sandler, J. K. W.; Schartel, B.

Chemical and thermal characterization of phosphorus-containing aromatic polysulfones and their applicatio Proceedings Article

In: 2008.

Salis-Soglio, C; Mohmeyer, N; Altstädt, V; Sessler, G M; Schmidt, H -W

Electret additives for isotactic polypropylen Proceedings Article

In: 13th Symp. Electrets, 2008.

Ruckdäschel, H; Gutmann, P; Greiner, C; Altstädt, V

Enhanced Cellular Materials by Foaming Nanostructured Blends and Nanoreinforced Polymers Proceedings Article

In: 13. International Conference Polymeric Materials, 2008.

Spörrer, A N J; Bangarusampath, D S; Altstädt, V

Foam injection molding of very-low density and thin-walled parts for lightweight design Proceedings Article

In: FOAMS TopCon, 2008.

Handge, U.

Melt Elongation of Disperse Polymer Systems: From Orientation of Carbon Nanotubes to Production of Dichroic Polymer Film Proceedings Article

In: 2008.

Handge, U.

Microscopic Deformation Mechanisms in Melt Extension of a Styrene-Butadiene Block Copolymer and its Blends with Polystyren Proceedings Article

In: 2008.

Altstädt, V

Haptik elastischer Polymere Proceedings Article

In: Nees-Institut für Biodiversität der Pflanzen, 2008.

Altstädt, V

High Pressure Homogenization - A Novel Technology for Dispersing Nanoparticles in Thermosetting Resin System Proceedings Article

In: Material Science and Engineering, 2008.

Götz, C.

Dynamic creep and fatigue performance of thermoplastic elastomers as biomaterials Proceedings Article

In: 2008.

Spoerrer, N. J.; Bangarusampath, D. S.; Altstädt, V.

Foam injection molding of very-low density and thin-walled parts for lightweight design Proceedings Article

In: 2008.

Lim, G. T.; Forman-Orlowsk, Elizabeth; Pavka, Paul; Goetz, Christian; Altstädt, Volker; Puskas, Judit

Novel High Temperature Styrenic TPE Nanocomposites Proceedings Article

In: 2008.

Spörrer, A. N. J.; Altstädt, V.

Structural foams having moderate thickness and ultra-low density prepared by a new injection moulding process Proceedings Article

In: 2008.

Gunkel, F.; A.N.J, Spörrer; Lim, G. T.; Bangarusampath, D. S.; Altstädt, V.

Understanding Melt Rheology and Foamability of PP-based TPO Blend Proceedings Article

In: 2007.

Wolff-Fabris, F.

Toughness Modification of the RTM6(r) Epoxy Resin System using Thermoplastics and Block-Copolyme Proceedings Article

In: 2007.

Altstädt, V.

Schaumstoffe hoher Funktionalität für den Systemleichtbau Proceedings Article

In: 2007.

Fabris, F. Wolff; Altstädt, V.

Electron Beam Curing - Challenges&Opportunitie Proceedings Article

In: 2007.

Beier, U.; Altstädt, V.

Optimierung vernähter Hochleistungsfaserverbund Proceedings Article

In: 2007.

Ruckdäschel, H.; Altstädt, V.

Entwicklungspotential bei Strukturschäume Proceedings Article

In: 2007.

Ruckdäschel, H.

Processing and Properties of foamed polymer blend Proceedings Article

In: 2007.

Beier, U; Altstädt, V

Optimierung vernähter Hochleistungsfaserverbund Proceedings Article

In: 13. Nationales Symposium SAMPE Deutschland e.V., 2007.

Wolff-Fabris, F; Sanches, A A F; Altstädt, V

Toughness enhancement of the RTM6 System employing engineering thermoplastics and block-copolymers Proceedings Article

In: 9. Congresso Brasileiro de Polimeros, 2007.

Ruckdäschel, H; Altstädt, V; Müller, A

Foaming of polymer blends - Chance and challenge; Proceedings Article

In: Cellular Polymers, 2007.

Lim, G T; Schäferhans, J; Fischer, F; Altstädt, V

Predictive Mechanical Models for Cellular Material Proceedings Article

In: EUROMAT 2007, 2007.

Ruckdäschel, H

Processing and Properties of foamed polymer blend Proceedings Article

In: Polymer Blends, 2007.

Wolff-Fabris, F; Beier, U; Sanches, A A F; Perez, R; Altstädt, V

RTM6 / Block Co-Polymer Blends for Carbon Fibre Reinforced Composite Proceedings Article

In: Baekeland Symposium, 2007.

Fabris, F. Wolff; Beier, U.; Sanches, A. A. F.; Perez, R.; Altstädt, V.

RTM6 / Block Co-Polymer Blends for Carbon Fibre Reinforced Composite Proceedings Article

In: 2007.

Wolff-Fabris, F.; Sanches, A. A. F.; Altstädt, V.

Toughness enhancement of the RTM6 System employing engineering thermoplastics and block-copolymers Proceedings Article

In: 2007.

Altstädt, V

Schaumstoffe hoher Funktionalität für den Systemleichtbau Proceedings Article

In: 11. Dresdebener Leichtbausymposium - Materialeffizienz durch Systemleichtbau, 2007.

Ruckdäschel, H; Altstädt, V; Müller, A H E

Tailoring of cellular polymers by blending Proceedings Article

In: BioFoams 2007, 2007.

Altstädt, V; Ruckdäschel, H

Anwendung der Nanotechnologie zur Entwicklung neuer Polymerschäume Proceedings Article

In: Kunststoffe für die Praxis - Werkstoffmodifikationen - Prozesse - Umwelt, 2007.

Lovera, D; Ruckdäschel, H; Altstädt, V; Schmidt, H W; Giesa, R

Compact and foamed polymer blends with superior electret behavior Proceedings Article

In: 10th BPS, 2007.

Wolff-Fabris, F; Beier, U; Perez, R; Sanches, A A F; Altstädt, V

Toughness Modification of the Epoxy System RTM6 with Thermoplastics and Block-Copolymer Proceedings Article

In: EUROMAT 2007, 2007.

Wolff-Fabris, F

Toughness Modification of the RTM6(r) Epoxy Resin System using Thermoplastics and Block-Copolymer Proceedings Article

In: SEICO 07 - 28th SAMPE Europe - International Conference - „The use of composites in the 21st. century to save energy and weight“, 2007.

Llamas, C. Bilbao

Electrospinning of PPE Blend Proceedings Article

In: 2007.

Altstädt, V.; Ruckdäschel, H.

Anwendung der Nanotechnologie zur Entwicklung neuer Polymerschäum Proceedings Article

In: 2007.

Altstädt, V.

Foaming Behaviour of Nanostructured Polymer Blend Proceedings Article

In: 2007.

Gunkel, F; Spörrer, A N J; Lim, G T; Bangarusampath, D S; Altstädt, V

Understanding Melt Rheology and Foamability of PP-based TPO Blend Proceedings Article

In: ANTEC 2007 - Annual Technical Conference, 2007.

Ruckdäschel, H.

Anwendungseigenschafte Proceedings Article

In: 2007.

Ruckdäschel, H.

Verarbeitungsverhalten und Thermodynamik von Polymerblends Proceedings Article

In: 2007.

Lim, G. T.; Schäferhans, J.; Fischer, F.; Altstädt, V.

Predictive Mechanical Models for Cellular Material Proceedings Article

In: 2007.

Fabris, F. Wolff; Beier, U.; Perez, R.; Sanches, A. A. F.; Altstädt, V.

Toughness Modification of the Epoxy System RTM6 with Thermoplastics and Block-Copolymer Proceedings Article

In: 2007.

Ruckdäschel, H

Verarbeitungsverhalten und Thermodynamik von Polymerblends Proceedings Article

In: SKZ Seminar, Physik der Polymerwerkstoffe, 2007.

Ruckdaeschel, H.; Gutmann, P.; Altstädt, V.; Schmalz, H.; Mueller, A. H. E.

Development of Micro- and Nanocellular Polymer Proceedings Article

In: 2007.

Ruckdäschel, H.; Altstädt, V.; Müller, A. H. E.

Tailoring of cellular polymers by blending Proceedings Article

In: 2007.

Ruckdaeschel, H; Gutmann, P; Altstädt, V; Schmalz, H; Mueller, A H E

Development of Micro- and Nanocellular Polymer Proceedings Article

In: MRS 2007 Fall Meeting, 2007.

Gutmann, P.; Bangaru, S. D. S.; Ruckdäschel, H.; Altstädt, V.; Müller, A. H. E.

Foaming of multiphase blend system Proceedings Article

In: 2007.

Fabris, Wolff F; Altstädt, V

Electron Beam Curing - Challenges&Opportunities Proceedings Article

In: 13. Nationales Symposium SAMPE Deutschland e.V., 2007.

Apeldorn, T.; Langenfelder, D.; Altstädt, V.

Entwicklung einer geschäumten thermoplastischen Leiterplatte Proceedings Article

In: 2007.

Ruckdäschel, H; Altstädt, V

Entwicklungspotential bei Strukturschäume Proceedings Article

In: 13. Nationales Symposium SAMPE Deutschland e.V., 2007.

Altstädt, V

Foaming Behaviour of Nanostructured Polymer Blend Proceedings Article

In: Third International Symposium on Engineering Plastics, 2007.