Publications
Search all Publications
Morphology Formation in PC/ABS Blends during Thermal Processing and the Effect of the Viscosity Ratio of Blend Partners Journal Article In: Materials, vol. 9, no. 8, pp. 659, 0000. DOI: 10.3390/ma9080659 |
Effect of Matrix Properties on Quasi-Static and Fatigue Properties of Thermosetting Polyurethane and its GFRP composites Journal Article In: Authorea, 0000. |
From vibrating molecules to a running shoe: connecting dielectric properties with process feedback in radio-frequency welding of TPU bead foams Proceedings 0000. |
Application of Digital Methods in Polymer Science and Engineering Journal Article In: Advanced Functional Materials , no. 8, 0000. |
Novel Amine Hardeners Derived from Eugenol for Biobased Epoxy Resins: Synthesis and Multiscale Characterization Journal Article In: SSRN, 0000. DOI: 10.2139/ssrn.5234157 |
Charge storage of compact and fibrous blends based on polyphenylene ether Proceedings Article In: 2008 13th International Symposium on Electrets, IEEE, 0000. |
Evaluation of the Larc03 Failure Criterion for Carbon-Fiber Composites with Thin Embedded Plies in Cryogenic Environments Using Different Fiber Types Journal Article In: SSRN, 0000. DOI: 10.2139/ssrn.5348713 |
Influence of chemical structure of bisamide additives on charge storage properties of isotactic polypropylene Proceedings Article In: 2008 13th International Symposium on Electrets, IEEE, 0000. |
Analyzing the influence of particle size and stiffness state of the nanofiller on the mechanical properties of epoxy/clay nanocomposites using a novel shear-stiff nano-mica Journal Article In: Journal of Materials Science, vol. 50, no. 14, pp. 4845–4859, 0000. |
Additives to Improve the Electret Performance of Polypropylen Proceedings Article In: 2008 13th International Symposium on Electrets, IEEE, 0000. |
Lifetime Prediction of Thermo-Oxidative Degradation of a Modified Epoxy Resin and its Glass Fiber Composite in Air Atmosphere and Correlation with Long-Term Aging Behavior Journal Article In: SSRN, 0000. DOI: 10.2139/ssrn.5343090 |
Carbon-based nanofillers/Poly(butylene terephthalate): thermal, dielectric, electrical and rheological properties Journal Article In: Journal of Polymer Research, vol. 22, no. 7, 0000. |
Synthesis and characterization of fluorinated poly(ether imide)s and their application as electret materials Proceedings Article In: 2008 13th International Symposium on Electrets, IEEE, 0000. |
The Role of Polymer Shrinkage and Oxidation in Thermal Aging Induced Crack Formation in Glass Fiber Reinforced Printed Circuit Boards Proceedings 0000. |
Evaluierung von Struktur-Eigenschaftsbeziehungen in PMMA-Nanokompositen auf Basis einer neuen Generation an Schichtsilikaten Journal Article In: Zeitschrift Kunststofftechnik, vol. 3, pp. 131–156, 0000. |
Deformation of Inclusions and Lamellae during Melt Elongation of Blends of a Styrene-Butadiene Block Copolymer with Polystyrene Proceedings Article In: AIP Conference Proceedings, AIP, 0000. DOI: 10.1063/1.2964754 |
Fatigue crack propagation behaviour of epoxy resins modified with silica-nanoparticles Journal Article In: Polymer, vol. 60, pp. 157–163, 0000. |
Full-field shear analyses of sandwich core materials using Digital Image Correlation (DIC) Journal Article In: Composites Part B: Engineering, vol. 70, pp. 156–166, 0000. |
Identification of failure mechanisms of metallised glass fibre reinforced composites under tensile loading using acoustic emission analysis Journal Article In: Composites Part B: Engineering, vol. 81, pp. 1–13, 0000. |
Influence of graphene on the cell morphology and mechanical properties of extruded polystyrene foam Journal Article In: Journal of Cellular Plastics, vol. 51, no. 4, pp. 413–426, 0000. |
Lignin as renewable raw material for applications in electronics Proceedings Article In: Author(s), 0000. DOI: 10.1063/1.4965524 |
Microcellular to nanocellular polymer foams: Progress (2004–2015) and future directions – A review Journal Article In: European Polymer Journal, vol. 73, pp. 500–519, 0000. |
Micromechanics of textquotedblleftraspberrytextquotedblright morphology in PPE/SAN polymer blends compatibilized with linear ABC triblock terpolymers Journal Article In: Polymer, vol. 80, pp. 52–63, 0000. |
Charge decay of electron-beam irradiated Polypropylene films containing additives Proceedings Article In: 2008 13th International Symposium on Electrets, IEEE, 0000. |
Preparation of microcellular low-density PMMA nanocomposite foams: Influence of different fillers on the mechanical, rheological and cell morphological properties Journal Article In: Composites Science and Technology, vol. 118, pp. 108–116, 0000. |
Special issue – Polymer foams Journal Article In: Polymer, vol. 56, pp. 3–4, 0000. |
The role of multi-walled carbon nanotubes in epoxy nanocomposites and resin transfer molded glass fiber hybrid composites: Dispersion, local distribution, thermal, and fracture/mechanical properties Journal Article In: Polymer Composites, vol. 38, no. 9, pp. 1849–1863, 0000. DOI: 10.1002/pc.23755 |
Acoustic emission analysis for characterisation of damage mechanisms in fibre reinforced thermosetting polyurethane and epoxy Journal Article In: Composites Part B: Engineering, vol. 56, pp. 477–483, 0000. |
Effect of dispersion and selective localization of carbon nanotubes on rheology and electrical conductivity of polyamide 6 (PA6), Polypropylene (PP), and PA6/PP nanocomposites Journal Article In: Journal of Polymer Science Part B: Polymer Physics, vol. 53, no. 5, pp. 368–378, 0000. DOI: 10.1002/polb.23638 |
Functionalized Graphene and Carbon Materials as Components of Styrene-Butadiene Rubber Nanocomposites Prepared by Aqueous Dispersion Blending Journal Article In: Macromolecular Materials and Engineering, vol. 299, no. 3, pp. 319–329, 0000. |
On the importance of specific interface area in clay nanocomposites of~PMMA filled with synthetic nano-mica Journal Article In: Polymer, vol. 55, no. 16, pp. 3770–3781, 0000. |
Rheological and crystallisation behaviour of high melt strength polypropylene under gas-loading Journal Article In: Polymer, vol. 55, no. 6, pp. 1537–1545, 0000. |
The effect of carbon black reinforcement on the dynamic fatigue and creep of polyisobutylene-based biomaterials Journal Article In: Journal of the Mechanical Behavior of Biomedical Materials, vol. 39, pp. 355–365, 0000. |
The Impact of Janus Nanoparticles on the Compatibilization of Immiscible Polymer Blends under Technologically Relevant Conditions Journal Article In: ACS Nano, vol. 8, no. 10, pp. 10048–10056, 0000. DOI: 10.1021/nn502662p |
Determination of adhesion between thermoplastic and liquid silicone rubbers in hard-soft-combinations via mechanical peeling test Proceedings Article In: American Institute of Physics, 0000. DOI: 10.1063/1.4873751 |
Towards completely miscible PMMA nanocomposites reinforced by shear-stiff, nano-mica Journal Article In: Journal of Colloid and Interface Science, vol. 425, pp. 143–151, 0000. |
Foam injection moulding of a TPO/TPC-blend and the effect of different nucleating agents on the resulting foam structure Proceedings Article In: American Institute of Physics, 0000. DOI: 10.1063/1.4873802 |
Großserientaugliche thermoplastische Sandwich-Strukturen Journal Article In: Lightweight Design, vol. 7, no. 4, pp. 56–62, 0000. |
INFLUÊNCIA DA ABSORÇÃO DE BIODIESEL NAS PROPRIEDADES DA BORRACHA NITRÍLICA Proceedings Article In: Anais do XX Congresso Brasileiro de Engenharia Química, Editora Edgard Blücher, 0000. |
An investigation on the flexural properties of balsa and polymer foam core sandwich structures: Influence of core type and contour finishing options Journal Article In: Journal of Sandwich Structures & Materials, vol. 15, no. 5, pp. 487–508, 0000. |
Efeito da hibridização de montmorilonita e celulose II sobre as propriedades mecânicas de nanocompósitos de borracha natural Journal Article In: Polímeros, vol. 23, no. 1, pp. 123–127, 0000. |
Influence of the composite surface structure on the peel strength of metallized carbon fibre-reinforced epoxy Journal Article In: Surface and Coatings Technology, vol. 232, pp. 319–325, 0000. |
Welcome Remarks by the Chairman of "The 29th International Conference of the Polymer Processing Society" Proceedings Article In: AIP Conference Proceedings 1593, 2, American Institute of Physics, 0000. DOI: 10.1063/1.4873723 |
Modeling and estimation of parameters for the curing of an epoxy/amine system Journal Article In: Polymer Testing, vol. 32, no. 4, pp. 647–654, 0000. |
Poly(vinylidene fluoride)/polyaniline/carbon nanotubes nanocomposites: Influence of preparation method and oscillatory shear on morphology and electrical conductivity Journal Article In: Polymer Testing, vol. 32, no. 8, pp. 1511–1521, 0000. |
Completely Miscible Polyethylene Nanocomposites Journal Article In: Journal of the American Chemical Society, vol. 134, no. 44, pp. 18157–18160, 0000. DOI: 10.1021/ja307297c |
Dielectric properties of highly filled thermoplastics for printed circuit boards Journal Article In: Journal of Applied Polymer Science, vol. 128, no. 6, pp. 3758–3770, 0000. DOI: 10.1002/app.38602 |
Impact of large aspect ratio, shear-stiff, mica-like clay on mechanical behaviour of PMMA/clay nanocomposites Journal Article In: Polymer, vol. 53, no. 15, pp. 3230–3237, 0000. |
Influence of polymeric flame retardants based on phosphorus-containing polyesters on morphology and material characteristics of poly(butylene terephthalate) Journal Article In: Journal of Applied Polymer Science, vol. 128, no. 5, pp. 3315–3324, 0000. DOI: 10.1002/app.38520 |
Tailored benzoxazines as novel resin systems for printed circuit boards in high temperature e-mobile application Proceedings Article In: American Institute of Physics, 0000. DOI: 10.1063/1.4873870 |