Publications
Search all Publications
Molecular mechanisms of thermal decomposition of PMMA-C60 composite Journal Article In: Polymers for Advanced Technolgies, submitted, (2010)., 2010. |
Toughness modification of electron beam curable epoxy matrices for carbon fibre composite Proceedings Article In: SAMPE Fall Technical Conference Proceedings, 2010. |
Toughness modification of electron beam cured epoxy using a silver complex as initiator Proceedings Article In: Polywheel, 2010. |
Treibmittel zum Herstellen von Schäumen unter Mikrowellenbestrahlung / Blowing Agent for Producing Foams under Microwave Irradiatio Patent WO 2011/023433 A1, (2010)., 2010. |
Trends in polymeric foam Proceedings Article In: Cluster Nanotechnology, 2010. |
Dehnrheologie von Polymerschmelze Proceedings Article In: Bayreuther Kompetentztage - Polymerrheologie"Von der Flüssigkeit biz zum Festkörper", 2010. |
Development and optimalization of thermoplastic substrate materials for recyclable printed circuit board application Proceedings Article In: 14. International Scientific Conference"Polymeric Materials", 2010. |
Viskoelastische, bruchmechanische und Ermüdungsrissausbreitungseigenschaften von Blends aus Polyamid 6 und Styrolpolymere Proceedings Article In: Wintersymposium des Lehrstuhls für Polymerwerkstoffe, 2010. |
Dispersion of nanoparticles in a polymer matrix: new processing and characterization method Proceedings Article In: Cluster-Treffen “Nanomaterialien: Herstellungsprozesse und Anwendungen, 2010. |
Surface Functionalization of Halloysite Nanotubes for Polyamide 6 Composite Journal Article In: Journal of Plastics Technology, 2010. |
High-performance fibre-reinforced composites prepared by a novel preform manufacturing routine PhD Thesis 2010. |
Foaming of an Immiscible Blend System Using Organic Liquids as Blowing Agents Journal Article In: Journal of Cellular Plastics, vol. 46, no. 3, pp. 239–258, 2010. |
Leichte Integralschäume durch Schaumspritzgießen mit optimierten Werkstoffen und variothermen Werkzeugen PhD Thesis 2010. |
Polymer materials for electret application Proceedings Article In: 2010. |
Organic liquids as blowing agents for blend system Proceedings Article In: 2010. |
Influence of manufacturing on the electret performance of commercial fluoropolymer grade Proceedings Article In: 2010. |
Nanotrends bei Polymerschäume Proceedings Article In: 2010. |
Morphological, thermal and viscoelastic properties of nanocomposites of PA 6 and nanotubes of the mineral halloysit Proceedings Article In: 2010. |
Toughness Modification of Electron Beam Curable Epoxy Matrices for Carbon Fibre Composite Proceedings Article In: 2010. |
Toughness modification of electron beam cured epoxy using a silver complex as initiato Proceedings Article In: 2010. |
Epoxy/Phenolic resin blend as matrix for RTM-manufactured carbon fibre reinforced composite Proceedings Article In: XII International Macromolecular Colloqium, 2010. |
Trends in polymeric foam Proceedings Article In: 2010. |
Dynamic Creep and Fatigue Performance of Dendric PIB-based Nanocomposite Proceedings Article In: 2010. |
Toughness modification of electron beam curable epoxy matrices for carbon fibre composite Proceedings Article In: 2010. |
Hyperbranched polymers as tougheners for fast curing epoxy resin system Proceedings Article In: 2010. |
Fatigue behavior of polymer blends and nanocomposites Proceedings Article In: 14th International Conference on Polymeric Materials, P.2010, Halle/Saale, Germany (2010)., 2010. |
Mechanical properties of core-shell rubber particles toughened epoxy resins and composite Proceedings Article In: 2010. |
Quality assurance aspects of modern preformin Proceedings Article In: 2010. |
Fast curing toughened epoxy resin systems for automotive application Proceedings Article In: 2010. |
Preforming quality assurance for high-performance fibre-reinforced composite Proceedings Article In: 2010. |
Fatigue crack growth in thermosetting polyurethanes. Effect of network structure and environmental conditions on the dynamic fatigue propertie Proceedings Article In: 2010. |
Dispersion of nanoparticles in a polymer matrix: new processing and characterization method Proceedings Article In: 2010. |
Characterization of the elastic properties of polymer-nanocomposites by creep-recovery experiment Proceedings Article In: 2010. |
Influence of the Molar Mass on the Thermal, Mechanical and Rheological Properties of Composites of Polyamide 6 and Halloysite Nanotube Proceedings Article In: 2010. |
The Innovation Potential of Polymer Foams Proceedings Article In: Blowing Agents and Foaming Processes, Smithers Rapra Technology Limited, Cologne, Germany, 2010, ISBN: 9781847354952. |
Rheologie mehrkomponentiger Polymerwerkstoffe: Grundlagen und Anwendun Proceedings Article In: 2010. |
Rheology of Polymer Blends and Nanocomposite Proceedings Article In: 2010. |
Viskoelastische, bruchmechanische und Ermüdungsrissausbreitungseigenschaften von Blends aus Polyamid 6 und Styrolpolymere Proceedings Article In: 2010. |
Expandable Thermoplastic Polymer Blend Patent WO/2010/012702, 2010. |
Thermal and Rheological Properties of Composites of Polyamide 6 and Halloysite Nanotube Proceedings Article In: 2010. |
Elastic Particle Foam Material Based on Polyolefin/Styrene Polymer Mixtures Patent WO/2010/100101, 2010. |
Thermal and Viscoelastic Properties of Polyamide 6/Halloysite Composite Proceedings Article In: 2010. |
Elastic Particle Foam Based on Polyolefin/Styrene Polymer Mixtures Patent WO/2010/076184, 2010. |
Elastic Particle Foam Based on Polyolefin/Styrene Polymer Mixtures Patent WO/2010/076213, 2010. |
Expandable Thermoplastic Polymer Particles Based on Polyolefin/Styrene Polymer Mixtures Using Isopentane or Cylopentane as a Blowing Agent Patent WO/2010/076185, 2010. |
Hyperbranched polymers as tougheners for fast curing epoxy resin system Proceedings Article In: SAMPE Fall Technical Conference Proceedings, 2010. |
Charge storage performance of polyetherimide Ultemtextregistered1000-Influence of secondary antioxidants and purification Journal Article In: Journal of Applied Polymer Science, vol. 115, no. 2, pp. 1247–1255, 2010. DOI: 10.1002/app.30823 |
Rheological and electrical percolation in melt-processed poly(ether ether ketone)/multi-wall carbon nanotube composites Journal Article In: Chemical Physics Letters, vol. 482, no. 1-3, pp. 105–109, 2009. |
Morphology and properties of injection-moulded carbon-nanofibre poly(etheretherketone) foams Journal Article In: Journal of Materials Science, vol. 44, no. 6, pp. 1427–1434, 2009, ISSN: 1573-4803. |
The effect of additives on charge decay in electron-beam charged polypropylene films Journal Article In: Journal of Physics D: Applied Physics, vol. 42, no. 6, pp. 065410, 2009. |