Publications
Search all Publications
The effect of hard and soft segment composition and molecular architecture on the morphology and mechanical properties of polystyrene–polyisobutylene thermoplastic elastomeric block copolymers Journal Article In: European Polymer Journal, vol. 39, no. 10, pp. 2041–2049, 2003. |
Studies on Accelerated Sulphur Vulcanization of Natural Rubber Using 1-Phenyl-2,4-Dithiobiuret/Tertiary Butyl Benzothiazole Sulphenamid Journal Article In: European Polymer Journal, vol. 39, pp. 1451-1460, 2003. |
Charakterisierung und Zähmodifizierung katalytisch härtender Epoxidharze auf Basis latenter Metallkomplexe mit Imidazolliganden PhD Thesis Technische Universität Hamburg, 2003. |
Fatigue behaviour of novel elastomeric biomaterials for load bearing applications Proceedings Article In: Europolymer Congress, Stockholm, Schweden, 2003. |
Nanocomposites – eine Einführung Proceedings Article In: Nanocomposites und Flammschutz, 2003. |
Novel Polyesters for Tendon Sheath Reconstruction Proceedings Article In: 21. Dechema-Jahrestagung der Biotechnologien&Forum Life Sciences, 2003. |
Studies on Accelerated Sulphur Vulcanization of Natural Rubber Using 1-Phenyl-2,4-Dithiobiuret/Tertiary Butyl Benzothiazole Sulphenamid Journal Article In: European Polymer Journal, vol. 39, pp. 1451-1460, 2003. |
Phosphorus-Containing Resins and Hardeners for Flame Retardance of Epoxies Proceedings Article In: FRPM, 2003. |
Hochtemperaturthermoplastschäume als mögliche Kernwerkstoffe in Sachwichkonstruktionen Journal Article In: Große Studienarbeit, Universtität Bayreuth, Lehrstuhl Polymere Werkstoffe, (2003)., 2003. |
Zähigkeitsoptimierung von PEEK mit Hilfe der Blend- und Compoundiertechni Journal Article In: Große Studienarbeit, Arbeitsbereich Kunststoffe und Verbundwerkstoffe, (2003)., 2003. |
Alternative thermoplastisch verarbeitbare und PVC-freie Werkstoffe in der Medizin für das Anwendungsgebiet Schlauchsysteme in der Infusion und Dialys Journal Article In: Diplomarbeit, Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, (2003)., 2003. |
Entwicklung einer Messapparatur zur Bestimmung der Permeation an offenzelligen, deformierbaren Schäume Journal Article In: Große Studienarbeit, Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, (2003)., 2003. |
Prüfmethoden für mikrozelluläre Polyurethanschäum Journal Article In: Kleine Studienarbeit, Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, (2003)., 2003. |
Influence of Nanoscale Morphology on the Micro- and Macromechanical Behaviour of Polymers and Polymer Composite Proceedings Article In: 2003. |
Rheological, mechanical and tribological properties of carbon-nanofibre reinforced poly (ether ether ketone) composites Journal Article In: Polímeros, vol. 13, no. 4, pp. 218–222, 2003. |
Phosphorus-Containing Resins and Hardeners for Flame Retardance of Epoxie Proceedings Article In: 2003. |
Evaluation of the Fatigue Properties of Novel Polyisobutylene-Polystyrene Thermoplastic Elastomer in Comparison with Other Rubbery Biomaterial Proceedings Article In: 2003. |
Novel Polyesters for Tendon Sheath Reconstruction Proceedings Article In: 2003. |
Herstellung von PEEK-Schäumen durch Konstruktion und Fertigung einer neuartigen Pressfor Journal Article In: Große Studienarbeit, Universität Bayreuth, Lehrstuhl Polymere Werkstoffe, (2003)., 2003. |
Environmental Stress Cracking of Polymers Monitored by Fatigue Crack Growth Experiment Proceedings Article In: 2003. |
Nanocomposites – eine Einführung Proceedings Article In: 2003. |
The Efficiency of Various Toughening Agents in Novel Thermoset Resin System Proceedings Article In: 2003. |
Rheological Properties of Carbon-Nanofibre Poly(ether ether ketone) Proceedings Article In: European Workshop on Carbon Nanotube/Nanofibre Reinforced Polymers, 2003. |
Accelerated evaluation of environmental ageing monitored by fatigue crack growth experiments Proceedings Article In: The Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics, Japan Society of Mechanical Engineers, 2003. |
Fatigue behaviour of novel elastomeric biomaterials for load bearing applications Proceedings Article In: 2003. |
Hysteresis Measurements on Micro Cellular Foam Proceedings Article In: 2003. |
Tribological Properties of Carbon-Nanofibre Reinforced Poly(ether ether ketone) Proceedings Article In: European Workshop on Carbon Nanotube/Nanofibre Reinforced Polymers, 2003. |
Charakterisierung und Zähmodifizierung katalytisch härtender Epoxidharze auf Basis latenter Metallkomplexe mit Imidazolligande PhD Thesis 2003. |
Environmental Stress Cracking of Polymers Monitored by Fatigue Crack Growth Experiment Proceedings Article In: 6th Annual UNESCO/IUPAC Conference, 2003. |
Evaluation of the Fatigue Properties of Novel Polyisobutylene-Polystyrene Thermoplastic Elastomer in Comparison with Other Rubbery Biomaterial Proceedings Article In: American Chemical Society, Rubber Division, Spring Technical Meeting, 2003. |
Hysteresis Measurements on Micro Cellular Foam Proceedings Article In: 6th Annual UNESCO/IUPAC Conference, 2003. |
The role of extensional rheology in the development of new closed cell foams Proceedings Article In: 2002. |
Neue Materialien Bayreuth eröffnet Journal Article In: Spektrum, (2002)., 2002. |
Comparative study of a block copolymer morphology by transmission electron microscopy and scanning force microscopy Journal Article In: Journal of Microscopy, vol. 205, no. 1, pp. 106–108, 2002. |
Morphology of multiblock copolymers as studied by micro-thermal analysis Journal Article In: Designed Monomers and Polymers, vol. 5, no. 2-3, pp. 353-361., 2002. |
Kompatibilisierung von Hochtemperaturthermoplastblends durch Blockcopolymer Proceedings Article In: GDCh-Fachgruppentagung Chemie, 2002. |
The Influence of Melt Elongational Properties on the Morphology of PES Cellular Materials Journal Article In: Cellular Polymers, vol. 21, no. 6, pp. 445–454, 2002. |
Morphological and mechanical properties of carbon-nanotube-reinforced semicrystalline and amorphous polymer composites Journal Article In: Applied Physics Letters, vol. 81, no. 27, pp. 5123–5125, 2002. DOI: 10.1063/1.1533118 |
Polymer Foams - Perspectives and Trend Proceedings Article In: 2002. |
Dynamic Behaviour of Microcellular Polyurethane Foam Proceedings Article In: 2002. |
Development of High Performance Polymer Blends Using Block Copolymer Proceedings Article In: 2002. |
Carbon-nanofibre-reinforced poly(ether ether ketone) composites Journal Article In: Composites Part A: Applied Science and Manufacturing, vol. 33, no. 8, pp. 1033-1039., 2002. |
Compatibilization of high performance polymer blends using block copolymers Proceedings Article In: Materials Week, München, 2002. |
Neue Materialien Bayreuth eröffnet Miscellaneous 2002. |
Compatibilization of high performance polymer blends using block copolymers Journal Article In: Materials Week, 2002. |
Kompatibilisierung von Hochtemperaturthermoplastblends durch Blockcopolymer Journal Article In: GDCh-Fachgruppentagung Chemie, Darmstadt, 2002. |
Multiblock Poly(aliphatic/aromatic-ester) Copolymers Containing Poly(dimethylsiloxane) in the Soft Segment Proceedings Article In: Polycondensation 2002, Hamburg, 2002. |
Compounds und Blends nach Maß Miscellaneous 2002. |
Die Knitting-Pattern-Morphologie in Poly(styrol)-block-Poly(ethylen-co-butylen)-block-Poly(methyl methacrylat) PhD Thesis Technische Universität Hamburg, 2002. |
Novel Organophosphorus Curing Agents for Advanced Composite Applications Proceedings Article In: International SAMPE Technical Conference, 2002. |