Wissenschaftliche Artikel
0000 |
Influence of Nanoscale Morphology on the Micro- and Macromechanical Behaviour of Polymers and Polymer Nanocomposites Artikel In: Solid State Phenomena, Bd. 121-123, S. 1391-1394, 0000. |
Flame Retardancy of Polymers: The Role of Specific Reactions in the Condensed Phase Artikel In: Macromolecular Materials and Engineering, Bd. 301, Nr. 1, S. 9-35, 0000. |
Analysis of fatigue crack growth behaviour in polymers and their composites based on ordinary differential equations parameter estimation Artikel In: Polymer Testing, Bd. 18, Nr. 1, S. 11–35, 0000. |
Thermoplastic elastomers 1. Poly(ether-ester-imide)s based on 1,4-diaminobutane, trimellitic anhydride, 1,4-dihydroxybutane and poly(tetramethylene oxide) diols Artikel In: Polymer, Bd. 42, Nr. 16, S. 6699–6708, 0000. |
Comparative study of a block copolymer morphology by transmission electron microscopy and scanning force microscopy Artikel In: Journal of Microscopy, Bd. 205, Nr. 1, S. 106–108, 0000. |
Morphological Studies of Poly(styrene)-block-poly(ethylene-co-butylene)-block-poly(methyl methacrylate) in the Composition Region of the textquotedblleftKnitting Patterntextquotedblright Morphologytextsection Artikel In: Macromolecules, Bd. 34, Nr. 7, S. 2121–2128, 0000. DOI: 10.1021/ma0017079 |
Thermoplastic Elastomers: 3. Poly(Ether-Ester-Imide)s Based on 1,6-Diaminohexane, Trimellitic Anhydride, 1,4-Dihydroxybutane and Poly(Tetramethylene Oxide) Artikel In: High Performance Polymers, Bd. 13, Nr. 3, S. 119–132, 0000. |
Effect of the polymer matrix on the properties of advanced composites Artikel In: Makromolekulare Chemie. Macromolecular Symposia, Bd. 50, Nr. 1, S. 137–145, 0000. |
Interlaminar crack growth in third-generation thermoset prepreg systems Artikel In: Polymer, Bd. 34, Nr. 4, S. 907–909, 0000. |
Mechanical and Viscoelastic Characterization of Hyperbranched Polyisobutylenes Artikel In: Rubber Chemistry and Technology, Bd. 75, Nr. 5, S. 853–864, 0000. DOI: 10.5254/1.3547688 |
Thermoplastic Elastomers 2. Poly(ether-esterimide)s Based on 1,4-Diaminobutane, Trimellitic Anhydride, 1,4-Dihydroxybutane and Poly(ethylene oxide) Artikel In: Journal of Macromolecular Science, Part A, Bd. 38, Nr. 5-6, S. 451-466., 0000. DOI: 10.1081/ma-100103360 |
Blends of Poly(ether imide) and Styrene Sulfonic Acid Based Polymer: Thermal, Mechanical and Ionic Conduction Behavior Artikel In: International Journal of Polymeric Materials, Bd. 56, Nr. 5, S. 521–534, 0000. |
Thermoplastic Elastomers 4. Poly(ether-ester-imide)s Derived from Trimellitic Anhydride, 1,6 Diaminohexane,1,4-Dihydroxybutane and Poly(ethylene oxide) Artikel In: International Journal of Polymeric Materials, Bd. 50, Nr. 3-4, S. 359-372., 0000. |
The Challenge of Foam Injection-Moulding – Possibilities to Improve Surface Appearance, Foam Morphology and Mechanical Properties Artikel In: Cellular Polymers, Bd. 27, Nr. 2, S. 101–121, 0000. |
Investigation of structure–property relationships of polyisobutylene-based biomaterials: Morphology, thermal, quasi-static tensile and long-term dynamic fatigue behavior Artikel In: Journal of the Mechanical Behavior of Biomedical Materials, Bd. 10, S. 206–215, 0000. |
Morphology of multiblock copolymers as studied by micro-thermal analysis Artikel In: Designed Monomers and Polymers, Bd. 5, Nr. 2-3, S. 353-361., 0000. |
Caracterização térmica e dinâmico-mecânica de compósitos TPU/mica preparados em reômetro de torque Artikel In: Polímeros, Bd. 21, Nr. 3, S. 240–245, 0000. |
Synthesis of PEEK/PSU Multiblock Copolymers Artikel In: High Performance Polymers, Bd. 16, Nr. 1, S. 3–20, 0000. |
The Influence of Melt Elongational Properties on the Morphology of PES Cellular Materials Artikel In: Cellular Polymers, Bd. 21, Nr. 6, S. 445–454, 0000. |
Foaming of an Immiscible Blend System Using Organic Liquids as Blowing Agents Artikel In: Journal of Cellular Plastics, Bd. 46, Nr. 3, S. 239–258, 0000. |
Morphological and mechanical properties of carbon-nanotube-reinforced semicrystalline and amorphous polymer composites Artikel In: Applied Physics Letters, Bd. 81, Nr. 27, S. 5123–5125, 0000. DOI: 10.1063/1.1533118 |
Numerical Simulation of Mechanical Properties of Cellular Materials Using Computed Tomography Analysis Artikel In: Journal of Cellular Plastics, Bd. 45, Nr. 5, S. 441–460, 0000. |
Understanding the Compressive Behavior of Linear and Cross-linked Poly(vinyl chloride) Foams Artikel In: Journal of Cellular Plastics, Bd. 45, Nr. 5, S. 419–439, 0000. |
Influence of e-beam irradiation on the dynamic creep and fatigue properties of poly(aliphatic/aromatic-ester) copolymers for biomedical applications Artikel In: Polymer, Bd. 50, Nr. 23, S. 5499–5507, 0000. |
Carbon-nanofibre-reinforced poly(ether ether ketone) composites Artikel In: Composites Part A: Applied Science and Manufacturing, Bd. 33, Nr. 8, S. 1033-1039., 0000. |
Fatigue behaviour of multiblock thermoplastic elastomers. 1. Stepwise increasing load testing of poly(aliphatic/aromatic-ester) copolymers Artikel In: Polymer, Bd. 44, Nr. 16, S. 4635-4642, 0000. |
Fatigue behaviour of multiblock thermoplastic elastomers. 2. Dynamic creep of poly(aliphatic/aromatic-ester) copolymers Artikel In: Polymer, Bd. 44, Nr. 16, S. 4643–4650, 0000. |
Effect of sample thickness on the mechanical properties of injection-molded polyamide-6 and polyamide-6 clay nanocomposites Artikel In: Polymer, Bd. 44, Nr. 8, S. 2441-2446, 0000. |
Synthesis and characterization of multiblock copolyesters containing poly(dimethylsiloxane) in the soft segments Artikel In: Macromolecular Symposia, Bd. 199, Nr. 1, S. 125–134, 0000. |
The effect of hard and soft segment composition and molecular architecture on the morphology and mechanical properties of polystyrene–polyisobutylene thermoplastic elastomeric block copolymers Artikel In: European Polymer Journal, Bd. 39, Nr. 10, S. 2041–2049, 0000. |
Fatigue behaviour of multiblock thermoplastic elastomers. 3. Stepwise increasing strain test of poly(aliphatic/aromatic-ester) copolymers Artikel In: Polymer, Bd. 45, Nr. 1, S. 263-273, 0000. |
Tribological behaviour of carbon-nanofibre-reinforced poly(ether ether ketone) Artikel In: Wear, Bd. 257, Nr. 9-10, S. 1006-1014, 0000. |
Melt processed blends of poly(styrene-co-acrylonitrile) and poly(phenylene ether) compatibilized with polystyrene-b-polybutadiene-b-poly(methyl methacrylate) triblock terpolymers Artikel In: Polymer, Bd. 45, Nr. 16, S. 5653-5660, 0000. |
Nucleation of isotactic polypropylene by triphenylamine-based trisamide derivatives and their influence on charge-storage properties Artikel In: Polymer, Bd. 45, Nr. 19, S. 6655-6663, 0000. |
Environmental Stress Cracking of Polymers Monitored by Fatigue Crack Growth Experiment Artikel In: Macromolecular Symposia, Bd. 214, Nr. 1, S. 31–46, 0000. |
Interrelation between mechanical response, strain field, and local free volume evolution in glassy polymers: Seeking the atomistic origin of post-yield softening Artikel In: Express Polymer Letters, Bd. 12, Nr. 1, S. 2–12, 0000. |
Messung der Löslichkeit und des Stofftransports von CO2 in polymeren Werkstoffen mit Hilfe einer Magnetschwebewaage Artikel In: Chemie Ingenieur Technik, Bd. 76, Nr. 9, S. 1352–1352, 0000. |
Effect of DOP-based compounds on fire retardancy, thermal stability, and mechanical properties of DGEBA cured with 4,4$prime$-DDS Artikel In: Journal of Materials Science, Bd. 41, Nr. 2, S. 341–353, 0000. |
The efficiency of various toughening agents in novel phenolic type thermoset resin systems Artikel In: Journal of Materials Science, Bd. 41, Nr. 24, S. 8226-8243, 0000. |
Crystallisation behaviour of Polyamide-6 and Polyamide-66 nanocomposites Artikel In: Composites Science and Technology, Bd. 66, Nr. 3-4, S. 571–575, 0000. |
Comparison of the performance of vulcanized rubbers and elastomer/TPE/iron composites for less lethal ammunition applications Artikel In: Polymer Engineering & Science, Bd. 45, Nr. 7, S. 966–975, 0000. DOI: 10.1002/pen.20363 |
Charge storage behavior of isotropic and biaxially-oriented polypropylene films containing $upalpha$- and $upbeta$-nucleating agents Artikel In: Journal of Applied Polymer Science, Bd. 99, Nr. 3, S. 650-658, 0000. DOI: 10.1002/app.22502 |
Biocompatibility and Fatigue Properties of Polystyrene-Polyisobutylene-Polystyrene, an Emerging Thermoplastic Elastomeric Biomaterial Artikel In: Biomacromolecules, Bd. 7, Nr. 3, S. 844–850, 0000. DOI: 10.1021/bm050971c |
Carbon nanofibre-reinforced ultrahigh molecular weight polyethylene for tribological applications Artikel In: Journal of Applied Polymer Science, Bd. 104, Nr. 6, S. 4173-4181, 0000. DOI: 10.1002/app.26058 |
Compatibilisation of PPE/SAN blends by triblock terpolymers: Correlation between block terpolymer composition, morphology and properties Artikel In: Polymer, Bd. 47, Nr. 8, S. 2772–2790, 0000. |
Effective halogen-free flame retardants for carbon fibre-reinforced epoxy composites Artikel In: Journal of Materials Science, Bd. 41, Nr. 15, S. 4981–4984, 0000. |
Additives to improve the electret properties of isotactic polypropylene Artikel In: Polymer, Bd. 48, Nr. 6, S. 1612-1619, 0000. |
Improvement of the Mechanical Properties and Creep Resistance of SBS Block Copolymers by Nanoclay Fillers Artikel In: Macromolecular Materials and Engineering, Bd. 292, Nr. 1, S. 23–32, 0000. |
Mechanical performance of carbon fibre-reinforced composites based on stitched preforms Artikel In: Composites Part A: Applied Science and Manufacturing, Bd. 38, Nr. 7, S. 1655-1663, 0000. |
Phase morphology, crystallisation behaviour and mechanical properties of isotactic polypropylene/high density polyethylene blends Artikel In: European Polymer Journal, Bd. 40, Nr. 9, S. 2105-2115, 0000. |